eBay

Feature:

1. The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
2. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A current.
3. The inputs can be pulsewidth modulated (PWM) to control motor speed, using a choice of current-decay modes.
4. The DRV8871 device has advanced currentregulation circuitry that does not use an analog voltage reference or external sense resistor.
5. This novel solution uses a standard low-cost, low-power resistor to set the current threshold.
6. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions.
7. The device is fully protected from faults and short circuits, including undervoltage (UVLO), overcurrent (OCP), and overtemperature (TSD).
8. When the fault condition is removed, the device automatically resumes normal operation.

Specification:

Condition: 100% Brand New

Item Type: DC Motor Driver

Material: Metal

Color: Black

H-Bridge Motor Driver
– Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
• Wide 6.5-V to 45-V Operating Voltage
• 565-mΩ Typical RDS(on) (HS + LS)
• 3.6-A Current Drive
• PWM Control Interface
• Current Regulation Without a Sense Resistor
• Low-Power Sleep Mode
• Small Package and Footprint:
– 8-Pin HSOP With PowerPAD™
– 4.9 × 6 mm / 0.19 x 0.24in
• Integrated Protection Features:
– VM Undervoltage Lockout (UVLO)
– Overcurrent Protection (OCP)
– Thermal Shutdown (TSD)
– Automatic Fault Recovery

Applications:
• Printers
• Appliances
• Industrial Equipment
• Other Mechatronic Applications

Package List:

1 x DC Motor Driver

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.ziopt.com/upload/third_resource/image/shipc73.jpg