Ebyte 10pcs nRF24L01P Wireless RF Transceiver Module E01-2G4M27D 27dBm SPI 2.4GHz 5km
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Brand |
Ebyte |
IC |
nRF24L01P+ |
|
Model |
E01-2G4M27D |
Interface |
SPI |
|
Power |
27dBm |
Distance |
5000m |
|
RF connector |
SMA-K |
Frequency |
2400MHz (2400-2525MHz) |
|
E01 series 2.4Ghz wireless transceiver module based on nRF24L01P with SPI interface features small size and various application usage.E01 series modules are embedded with imported electronic parts, such as industrial crystals with high precision and TCXO. |
|||
|
General parameters |
||
|
Antenna type |
SMA-K |
50Ω characteristic impedance |
|
Operating temperature |
-40 ~ +85℃ |
- |
|
Operating humidity |
10% ~ 90% |
Relative humidity,No condensation |
|
Storage temperature |
-40 ~ +125℃ |
- |
|
Size |
14.5 * 18.0 mm |
- |
|
Weight |
4.9g |
Average weight |
|
Connector |
2*4*2.54 mm |
Plug-in |
|
Operation Range |
About 2000m |
Test condition: clear and open area& 20dBm, antenna gain:5dBi, height: 2m, air data rate: 250kbps |
|
Communication interface |
SPI |
Data rate: up to 10Mbps |
|
Transmitting length |
3 level FIFO |
32 bytes (maximum) for one package |
|
Receiving length |
3 level FIFO |
32 bytes (maximum) for one package |
|
Electrical parameters |
||
| Frequency Band | 2400 - 2525 MHz |
Adjustable |
| Supply voltage | 2.0 - 3.6 V DC |
Notes: the voltage higher than 3.6V is forbidden |
|
Communication voltage |
0.7VCC - 3.6 V DC |
VCC refers to the supply voltage |
| Transmitting power | 20dBm |
100mW |
| Air data rate | 250kbps - 2Mbps |
250kbps, 1Mbps, 2Mbps |
| Standby current | 1.0uA |
nRF24L01P sets as power-down, CE low level |
| Transmitting current | 130mA@20dBm |
≥300mA |
|
Receiving current |
21mA |
CE=1 |
|
Sensitivity
|
-106dBm/250kbps |
Please see more in IC datasheet |
|
PinA No. |
Pin item |
Pin direction |
Pin application |
|
1 |
GND |
Ground |
|
|
2 |
VCC |
Power supply 2.0V ~ 3.6V DC |
|
|
3 |
CE |
Input |
Chip Enable |
|
4 |
CSN |
Input |
SPI Chip select |
|
5 |
SCK |
Input |
SPI clock |
|
6 |
MOSI |
Input |
SPI master output slave input |
|
7 |
MISO |
Output |
SPI master input slave output |
|
8 |
IRQ |
Output |
Interrupt request |
