Upgraded Version PLA META FDM 3D Printer Material Polylactic acid is the gold standard for mostthermoplastic printing applications.Formulated with plant-based materials andpolymers, this non-toxic,  low-odor materialdoes not require the use of a heated bed. It is suitable for fast printing and printinglarge-sized models, printed products haveflat and smooth surfaces.   Well Performance High Quality: No Bubble No Clogging Low Shrinkage Printing Smooth Neatly Wound Filament	Filament PLA Meta Filament Diameter 1.75mm Tolerance ±0.02mm Printing Temperature 180-200℃ Bottom Plate Temperature Glue is required when not heated. Glue is not required when heated to 50-60℃. Printing Speed 50-100MM/s Rally (KGF) 9-12 Elongation at Break 35% Net Weight 1.1 KG/roll Length 330M
Paper spool Filament details
SMOOTHLY PRINTING 3D printer filaments feature tight tolerances and the highest quality standards to ensure your 3D printer runs trouble-free and delivers outstanding results. Good molding, no bubbles, no clogging and no warping.	LOW SHRINKAGE RATE The advantages of JAYO 3D Filaments are high purity, low shrinkage and excellent layer adhesion, which will meet your needs for different Printing Projects.	RECOMMENDED TEMPERATURE Printing Speed: 50-100 mm/s Print temperature:180 °C - 200 °C Bed temperature: 60 °C -80 °C for heat bed (Glue is required when not heating)
Tips: Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. Be sure to insert the free end of the filament into the holes to avoid being tangled for next time use. If there is no print plan within a few days, retract the filament to protect the printer nozzle.

PLA META Filament (1.1KG)
1. Environment friendly, non-toxic and biodegradable;
2. Warm colors
3. Low shrinkage;
4. Good strength and rigidity;
5. Toughness, not easy to break
6. The printing temperature is 180~200°. More energy saving.
7. Smooth printing: The printing effect is better than the PLA and PLA+.
8. Drop resistance and impact resistance: After the test, the drop resistance is better than PLA and PLA+.
Suitable for all models of FDM3D printers, suitable for printing handicrafts, artworks and industrial design samples, etc.

parameter
Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 180-200 ° C.
Bottom plate temperature: glue water is required if it is not heated. No glue water is required for heating from 50-65 ° C
Rally (KGF): 9-12
Melt index: 8-12 g / 10 min (190 ° C, 2.16 kg)
Elongation at break: 35%.
Printing speed: 50-100 MM / s
Air bubbles: 100% zero bubbles
Net weight: 1.1 kg / roll
Gross weight: 1.4kg / roll
Length: 1.75 mm (1.1 kg) = 330 m