Universal Glow Tube Clock Module for IN14/ IN12 S30 PCBA RGB Nixieclock

Popular

    Product Introduction

    Micro USB IN12 IN-12 PCBA Glow Tube DIY Retro Clock Module
    Instructions:

    1.Set time: Click the "down" button to set the time. Click "Up", "Down" to select the time, and press and hold the "Down" key to finish.

    2.12/24-hour module: click the "up" button to switch

    3.Sleep mode: long press "up", when it is not displayed, enter the sleep mode (22:00~07:00 not displayed. 07:00~22 :00 display). When all the numbers are displayed as "0", the module exits the sleep state.

    4.Set the background color: Long press "Down" to change the color. When the color is refreshed, it means it will automatically change the color (change one color every day); when the color is not refreshed, the color is fixed.

    Common problem:

    How long can the product be used and how long is its life span?

    The life span mainly depends on how you set the automatic switch time of the clock. It is recommended to set it to the off state when there is no one. Generally, it can be used for two to three years. The nominal life span of each tube reaches 10,000 hours! Of course, friends who play love Generally, I don’t worry too much about the lifespan. Replace which tube is broken. It’s easy to disassemble and assemble.

    How long can it be used and how long is its life span?

    The life span mainly depends on how you set the automatic switch time of the clock. It is recommended to set it to the off state when there is no one. Generally, it can be used for two or three years. The nominal life span of each tube reaches 10,000 hours. Of course, friends who play with feelings. Generally, I don’t worry too much about the lifespan. Replace which tube is broken. It’s easy to disassemble and assemble.

    Pay attention:

    1.The product is a loose part and requires simple assembly and welding by the customer

    2.The product does not have a glow tube (that is, 4 light bulbs that display numbers)

    3.The product does not have a battery, if you need to remember the time function, you need to buy an AG13 battery by yourself

    Package Included:

    Circuit board X1

    Acrylic Box X1

    Screw set X1

     

     

    Micro USB Tube for IN14 IN12 QS30 Glow Tube Clock PCBA
    Product introduction:
    1. Input: 5V 1A mirco USB
    2. The glow tube can be used directly after welding.
    3. Adopt imported high precision clock chip, with error within 1 minute in a year
    4. Automatic lamp off at night can be set (22:00-07:00, not on, 07:00-22:00)
    5. Size: 110x44mm
    8. Functions: 12 / 24-hour mode time display, anti poisoning program (display can be refreshed every 1-9 minutes), no alarm, remote control, no timing switch
     
    Special attention:
    1. the product is without glow tube
    2. the product is without battery. If the memory time function is needed, the customer needs to purchase an AG13 battery by himself
     
    The physical objects are as follows:

              O1CN01RPmVOl2FdAJC3gqsT_!!780868902

     

     
     

     

    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    Universal Glow Tube Clock Module for IN14/ IN12 S30 PCBA RGB Nixieclock

    Product Introduction

    Micro USB IN12 IN-12 PCBA Glow Tube DIY Retro Clock Module
    Instructions:

    1.Set time: Click the "down" button to set the time. Click "Up", "Down" to select the time, and press and hold the "Down" key to finish.

    2.12/24-hour module: click the "up" button to switch

    3.Sleep mode: long press "up", when it is not displayed, enter the sleep mode (22:00~07:00 not displayed. 07:00~22 :00 display). When all the numbers are displayed as "0", the module exits the sleep state.

    4.Set the background color: Long press "Down" to change the color. When the color is refreshed, it means it will automatically change the color (change one color every day); when the color is not refreshed, the color is fixed.

    Common problem:

    How long can the product be used and how long is its life span?

    The life span mainly depends on how you set the automatic switch time of the clock. It is recommended to set it to the off state when there is no one. Generally, it can be used for two to three years. The nominal life span of each tube reaches 10,000 hours! Of course, friends who play love Generally, I don’t worry too much about the lifespan. Replace which tube is broken. It’s easy to disassemble and assemble.

    How long can it be used and how long is its life span?

    The life span mainly depends on how you set the automatic switch time of the clock. It is recommended to set it to the off state when there is no one. Generally, it can be used for two or three years. The nominal life span of each tube reaches 10,000 hours. Of course, friends who play with feelings. Generally, I don’t worry too much about the lifespan. Replace which tube is broken. It’s easy to disassemble and assemble.

    Pay attention:

    1.The product is a loose part and requires simple assembly and welding by the customer

    2.The product does not have a glow tube (that is, 4 light bulbs that display numbers)

    3.The product does not have a battery, if you need to remember the time function, you need to buy an AG13 battery by yourself

    Package Included:

    Circuit board X1

    Acrylic Box X1

    Screw set X1

     

     

    Micro USB Tube for IN14 IN12 QS30 Glow Tube Clock PCBA
    Product introduction:
    1. Input: 5V 1A mirco USB
    2. The glow tube can be used directly after welding.
    3. Adopt imported high precision clock chip, with error within 1 minute in a year
    4. Automatic lamp off at night can be set (22:00-07:00, not on, 07:00-22:00)
    5. Size: 110x44mm
    8. Functions: 12 / 24-hour mode time display, anti poisoning program (display can be refreshed every 1-9 minutes), no alarm, remote control, no timing switch
     
    Special attention:
    1. the product is without glow tube
    2. the product is without battery. If the memory time function is needed, the customer needs to purchase an AG13 battery by himself
     
    The physical objects are as follows:

              O1CN01RPmVOl2FdAJC3gqsT_!!780868902

     

     
     

     

    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques