Wendt X5 5 Channel Portable Field Audio Mixer

The Wendt X5 portable field mixer is designed to provide the flexibility expected during the most demanding recording applications. Whether an ENG application, audio for film, documentary, audio for video application or sound effects recording, the mixer's 5 balanced XLR mic or line level switchable inputs provide flexible, reliable routing for the task at hand. All 5 microphone inputs of the X5 feature 3-position phantom power switches capable of sending 48V or 12T power to condenser microphones. Each channel features an independent rotary level control and PFL momentary switch which allows pre-fader listening via the monitor out. A 3-position low frequency roll-off switch is located on each channel, allowing frequency roll-off at 20Hz, 100Hz and 140Hz. The output section features a pair of XLR Male balanced connectors that are independently mic or line level switchable. A pair of mini XLR(TA3-M) connectors also output mic or line level signal and a 3.5mm(1/8") Stereo Mini jack is available for feeding a microphone level signal to camcorders and smaller portable recording devices. A 1/4" headphone with independent volume control is also provided on the X5. The 3-position headphone matrix switch allows monitoring in Mono, Stereo or Mid/Side modes, and an internal stereo limiter eliminates peaking and audio overload on output. Dual 3.5mm tape return inputs allow audio from 2 playback devices to be monitored through the mixer, and a multi-pin link connection allows multi unit operation. The X5 offers a very high level of flexibility and long term professionalism to the long term professional.

Specs:

5 Channels - including Channel 1 & 2 stereo (switchable)

4 Outputs

PFL (PreFade Listen) - 5 Channels, push button momentary

Line Out (B) - XLR R/L, balanced, mic/line switchable

Line Out (A) - TA3 R/L, balanced, mic/line switchable, also R+L or stereo

Returns - Multiple returns (front panel switchable) A & B, 3.5mm mini jack

Power - Internal (8 AA alkaline batteries, 12-15 hours), or external 9-18 v, 4-pin Hirose conn.

Link - Allows two X5 mixers to be cross-linked, (10 channel mix, plus 8 outputs), TA5 conn.

    Mic Powering - 48PH, DYN, 12T

Tone Oscillator - 400 Hz, 0db VU or 0dbu for PPM version

Low-Cut Filter - 10 Hz, 140 Hz, 12db/octave

Frequency Response - 20 Hz to 20 KHz

Distortion & Noise - Less than 0.1% THD and EIN -128dbV

Size & Weight - 11.28" x 7.4" x 1.85" (286mm x 188mm x 47mm), weight = 3.5 lbs. including 8 AA batteries (not included with auction)

Other Features - Limiter; PAN switches (front panel); slate mic; one phone jack (1/4”); mono or stereo headphone; MS tape return, multi-pin ENG cable port (X4 snake cable compatible); stereo mic out - unbalanced, 3.5mm; metering - VU and optional PPM.