Caution
1, please do not access the charger without installing the battery.
2、The capacity value marked on the panel is for the Samsung 21700-30T lithium battery
rated capacity / watt hour / mAh, when using other batteries panel capacity is not
The panel capacity is not valid when using other batteries.
Function introduction
This mobile power is the first device with pd3.1 protocol, max
Support 140w output, that is, the maximum 28v5a.
It can be equipped with 5 x 21700 batteries, each with a maximum capacity of 5000mah, with a total capacity of 25000mah = 92.5WH.
The capacity is 25000mah=92.5WH.
Installed 4800-5000mah each battery, the current needs more than 15a
Otherwise, the current is too low, which will cause the power to fail or to raise
Pre-low voltage protection
Product with 1.3 inch 240 * 240 resolution ips color screen, can display
real-time power, voltage and current parameters of each interface. Can also display the power
Voltage and current remaining power, each battery voltage, temperature and other parameters.
Product internal full 4-layer pcb, heating elements close to the shell, rapid heat dissipation
Battery heat can also be quickly conducted out through the aluminum case.
Internal contact with the two sections of the battery using gold-plated terminals, greatly reducing the
Contact contact heat problems, reduce the contact resistance.
Three independent output ports
All can reach full power
The product has one PD100W bidirectional TYPE-C charging and discharging interface, one
PD 3.128V5A140W TYPE-C output interface, a USB-A through
output interface and a direct battery connection input and output DC5.5*2.5 connection
2 TYPE-C output interface and USB A output port completely independent output
Output, that is, 3 ports connected to 3 devices can reach full power.
Unlike ordinary rechargeable batteries only one device to reach full power.
Package Contents
JNS S20 solder-free mobile power kit 25000 mAh rechargeable battery portable 5S