Terminal Type EMI High Frequency Filter Module DC Component Power Purifier
Parameters:
Straightening filter specifications: (length) 160* (width) 48* (height) 33MM.
PCB material process: 1.6MM glass fiber double-sided, black oil double-sided tin plating.
Applicable wide voltage: 110VAC-265VAC
Applicable rated current: within 2000W
Wiring method: two options of crimping or plugging
Welded whole board weight: 0.2KG
Current is: 15A
This
de-straightening filter board can be used with decoders and power
amplifiers to filter the DC component of the power supply, eliminate
mains interference, etc., and effectively purify the power supply!
This DC elimination + filter circuit uses the flat wire SQ-type inductance to eliminate and prevent the noise of electrical appliances caused by the clutter and fluctuations in the AC power supply of the mains.
The DC elimination circuit built by diodes and capacitors can eliminate and prevent the DC components in the mains AC power supply, and prevent the transformer from being magnetically saturated or the static current increases due to the DC components. This circuit can suppress and eliminate the AC interference components, giving you Audio brings pure power supply
1. The flat wire SQ type inductor has the following advantages: 1. Small size, large current passing through, and the unit current density is more than 1.3 times that of the round copper wire;
2. The direct-elimination rectifier adopts tele-blocking and high-rectification rectification.
3. Closed magnetic circuit, small magnetic leakage, ideal EMI effect, good conduction radiation effect, and stable consistency;
4. High dielectric strength, which can prolong the life of the power supply.
PCB material process: 1.6MM glass fiber double-sided, black oil double-sided tin plating.
Applicable wide voltage: 110VAC-265VAC
Applicable rated current: within 2000W
Wiring method: two options of crimping or plugging
Welded whole board weight: 0.2KG
Current is: 15A
This DC elimination + filter circuit uses the flat wire SQ-type inductance to eliminate and prevent the noise of electrical appliances caused by the clutter and fluctuations in the AC power supply of the mains.
The DC elimination circuit built by diodes and capacitors can eliminate and prevent the DC components in the mains AC power supply, and prevent the transformer from being magnetically saturated or the static current increases due to the DC components. This circuit can suppress and eliminate the AC interference components, giving you Audio brings pure power supply
1. The flat wire SQ type inductor has the following advantages: 1. Small size, large current passing through, and the unit current density is more than 1.3 times that of the round copper wire;
2. The direct-elimination rectifier adopts tele-blocking and high-rectification rectification.
3. Closed magnetic circuit, small magnetic leakage, ideal EMI effect, good conduction radiation effect, and stable consistency;
4. High dielectric strength, which can prolong the life of the power supply.
Note:
The electronic original product batches are different, and the color is
sometimes different, but the guaranteed quality is the same.
Package: 1x Terminal Type EMI High Frequency Filter Module DC Component Power Purifier
Shippment:
1.Every parcel will be registered with tracking number.
2.International shipping requires complicated shipping procedures (such as both countries customs, transit stations etc.), also will be affected by many factors, such as holidays, weather conditions et. If the transportation time is not normal, please contact us
2.International shipping requires complicated shipping procedures (such as both countries customs, transit stations etc.), also will be affected by many factors, such as holidays, weather conditions et. If the transportation time is not normal, please contact us