Standard Resin

ABS-Like Resin

Water washable Resin

Plant-Base Resin

PA-Like Resin

JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin Printer

Parameter :

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s
  • Shore Hardness: 75-80D;
  • Shrinkage: 6-8%
  • Flexural strength: 25-50
  • Extensibility: 20-45 Mpa
  • Elongation at break: 20-50
  • Shelf life: 12 months
Good performance in toughness
Improved toughness, JAYO nylon-like 3D printing resin has higher toughness than traditional 3D resin. Models that can withstand large tensions cannot easily break. High-quality 3D resin for resin printers		 High precision and filigree prints
Use high-quality materials and a rigorous production process,
to achieve a high-precision nylon resin printing effect. With a delicate printing model and a clear surface texture, you can really achieve a smooth and comfortable printing experience		 Increase in hardness
Nylon-like resin with increased hardness, which is harder than ABS-like resin. The model is drillable, but not brittle. It meets your needs for printing models with high hardness  

 

Standard Plus Resin

ABS-Like Resin Standard Resin

Water Washable Resin

Plant-Based Resin
 

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:30-80s

Normal Exposure:4-12s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-3.5s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:5-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:2-4s

  • Shore Hardness: 70-80D;

  • Shrinkage: 6-8%

  • Flexural strength: 30±10%MPa

  • Extensibility: 20-35 Mpa

  • Elongation at break: 20±5%

  • Shelf life: 12 months

  • Shore Hardness: 80-85D;

  • Shrinkage: 7-9%

  • Flexural strength: 35±10%MPa

  • Extensibility: 20-40 Mpa

  • Elongation at break: 10±5%

  • Shelf life: 12 months

  • Shore Hardness: 80-85D;

  • Shrinkage: 6-8%

  • Flexural strength: 45±10%MPa

  • Extensibility: 30-50 Mpa

  • Elongation at break: 11±3%

  • Shelf life: 12 months

  • Shore Hardness: 80-85D;

  • Shrinkage: 7-9%

  • Flexural strength: 30±10%MPa

  • Extensibility: 20-35 Mpa

  • Elongation at break: 5-12%

  • Shelf life: 12 months

Standard Plus Resin

PA-Like Resin

Printer Setting:

RGB LCD Screen：

Bottom Exposure:30-80 s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:20-60 s

Normal Exposure:1.5-3s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

  • Shore Hardness: 80-84 D;

  • Shrinkage: 7-9%

  • Flexural strength: 35MPa

  • Extensibility: 33 Mpa

  • Elongation at break: 15%

  • Shelf life: 12 months

  • Shore Hardness: 70-80D;

  • Shrinkage: 6-8%

  • Flexural strength: 20-45MPa

  • Extensibility: 25-50 Mpa

  • Elongation at break: 20-50%

  • Shelf life: 12 months

 

JAYO 3D Resin 405nm UV For LCD/DLP/SLA 3D Printer

Important Safety Instructions:

  • Shake the bottle before use

  • Recommended temperature 20°C - 25°C

  • Protect it from dust and direct sunlight

  • Keep it out of the reach of children.

  • Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.

 
PushAuction

On 14/06/2024 at 22:11:25 AEST, seller added the following information:

DataCaciques