DC 12V AC 110V-220V LED Dual Display Cycle Timing Delay Relay Module 0-999 Hours

Popular

    Product Introduction

    Description:
    Name: Digital display time relay module
    Material: plastic+metal
    Colour: Black
    System Power: DC 12V | AC 110-220V

    Installation: 79mm*43mm*26mm
    Timing range: 0-999S/0-999M/0-999H
    Product features: timer / delay / cycle / covering 18 kinds of functions
    Maximum operating current: 10A
    Maximum power: 1500W

    Function:
    Can be used for timing, delay, cycle timing, intermittent timing and other occasions.

    Instruction Manual
    * Before using the first prompt the user to note that after setting the data must wait 6s, 6s after the module will automatically save the memory settings data.
    * Press the SET key once to enter the time setting mode, the red digital tube flicker, through button plus or minus button to adjust the setting time T1.After T1 is set short press the SET button again , the digital tube flicker, through button plus or minus button to set time.After time T2, T2 time is set, press the SET button again, the system will automatically save the memory setting time or wait 6s, must wait 6s,6s after the module will automatically remember to save the data.
    * Long press SET to enter parameter setting mode. There are two sets of parameters for the user to select P0, P1. Pressing SET in the current mode switches P0, P1. In the P0 parameter can be set by button plus or minus button for their own timing mode. Under the P1 parameter, you can set the operation mode by pressing the button plus or minus button.
    P0--0: T1 Timer time mode is seconds
    P0--1: T1 timer time mode is minutes
    P0--2: T1 timing time mode is hour
    P1--0: T1 time delay relay (T1 timer)
    P1--1: T1 delay time relay releases (T1 timer)
    P1--2: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timing) ends.
    P1--3: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timing) ends.
    P1--4: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timer), repeat the cycle.
    P1--5: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timer), repeat the cycle.
    For example: A customer needs time 10 seconds to boot, 20 seconds off, would always loop. Set up as follows:
    T1 set the time 10, T2 set the time 20
    P0-0 (T1 timing range is seconds)
    P1 - 5 (timer mode is the first to work then stop would always loop.)

    Package Included:
    1 x LED Dual Display Cycle Timing Delay Timer Relay Module 0-999 Hours
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques