This listing is for custom made 3D printed wall brackets for mounting 2000's era Star Wars Jedi Starfighter vehicles to your wall. These Starfighters were produced for the 3.75" figures, and I have versions that will fit different models from the movie versions to the Clone Wars animated series versions. There are different color schemes available on these Starfighters - my pictures do not represent all versions. Please base your purchase on the design style of the Starfighter, not the color. No actual Starfighters are provided with this listing - just the brackets.
I include an easy to install self tapping screw-in drywall anchor and screw with each bracket. All you need is a drill or even just a screwdriver! A tape measure helps if you want things lined up nicely too I guess...
To Install the ETA-2 Bracket: Screw the bracket to the wall. With the landing gear extended, place the support studs from the bracket into the landing gear openings. Use your fingers to guide the retaining hooks through the holes in the soft plastic central section of the Starfighter. The retaining hooks do not bear weight - they just keep the starfighter from sliding off the bracket in case you have a lot of door slammers or foot stompers in your house.
The 2 photos from the rear of the bracket shows how the posts and hooks engage with the Starfighter from the wall side - just for reference.
To Install the Delta-7 Bracket: See video for demo and this will make a lot more sense! Screw the wall bracket to the wall. Fully extend the front landing gear. Take the ship portion of the bracket, with the support tab facing down, place the tab into the landing gear slot, and rotate the bracket so the arms are up on either side of the landing gear. Close the landing gear as much as possible. Place the ship portion of the bracket between the arms of the wall portion, and align the holes. Place the retaining pin through the holes. Place the retaining clip on the pin.
To Install the Clone Wars Bracket: Determine the top of the bracket (see photos), and screw it to the wall. Extend the slide clip. Do not completely remove the slide clip (if it comes out, just push it back in a little). Extend the landing gear of the ship. Place the foot of the landing gear in the slot of the bracket. Close the sliding clip on the bracket. Push the ship into the wall to retract the landing gear and level the ship.
There are MANY different color schemes for these Starfighters - these brackets should cover most versions with the exception of the Delta-7 with Hyperspace ring, and Anakin's Modified Starfighter. Please examine your ship closely to the ones I picture - if the landing gear is the same, it should fit. If in doubt, please ask me BEFORE purchasing.
About 3D Printed items: They may have minor visual defects from the printing process. This is normal and does not impact function. Plus, you can't really see these brackets from behind the vehicles.
I combine shipping on multiple purchases. eBay will automatically combine shipping if you order multiple items from this listing - just add all items you want to your cart, and then pay. Request an invoice when purchasing from different listings to get the combined total.
About Galactic Collector: I am a collector of vintage Star Wars action figures, vehicles, and playsets. I regularly restore vintage pieces. I never part out complete items. I often buy broken/damaged/parts lots for salvage, and will resell leftover parts from those to hopefully benefit other restorers out there.