Store Categories
Product Overview
Details
Hydraulic Log splitter cylinder rebuild seal kit for 4.0"Bore x 1.75" rod cylinder
To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.
SEAL SIZE: Hydraulic Log Splitter Cylinder Rebuild Seal Kit Specifically designed to fit 4.0" Bore (I.D.) x 1.75" Rod (O.D.) Rod Cylinder. Please check that the inside diameter（I.D.）and outside diameter(O.D.) are the same size as your hydraulic cylinder before purchase
COST-EFFECTIVE: Boost log splitter performance with ECROUATY Splitter Rebuild Seal Kit. Designed for 4.0" Bore x 1.75" Rod Cylinders, this kit ensures easy rebuilding, preventing oil leaks and damage. Elevate your log splitter's durability today
GOOD SEAL NO LEAKS: Constructed of premium-grade material for better sealing performance without leakage. good abrasion resistance, decent tensile strength. Smooth surface, no burrs, better fit and provide long-lasting and reliable use without deformation
PREMIUM QUALITY: Complete with all necessary seals and o-rings, this cylinder rebuild seal kit guarantees long-lasting durability and reliability.
1.Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size.
2. Wear rings. Piston wear ring : 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR
4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
Below is 4.0"Bore x 1.75" rod cylinder Specification that made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4”
Part Type:cylinder rebuild seal kit
Seal Size: 4.0"Bore x 1.75"
Material :Rubber Plastic
11Pcs/Set Log splitter cylinder rebuild seal kits
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2018 DataCaciques
Product Overview
Details
Hydraulic Log splitter cylinder rebuild seal kit for 4.0"Bore x 1.75" rod cylinder
To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in.
SEAL SIZE: Hydraulic Log Splitter Cylinder Rebuild Seal Kit Specifically designed to fit 4.0" Bore (I.D.) x 1.75" Rod (O.D.) Rod Cylinder. Please check that the inside diameter（I.D.）and outside diameter(O.D.) are the same size as your hydraulic cylinder before purchase
COST-EFFECTIVE: Boost log splitter performance with Splitter Rebuild Seal Kit. Designed for 4.0" Bore x 1.75" Rod Cylinders, this kit ensures easy rebuilding, preventing oil leaks and damage. Elevate your log splitter's durability today
GOOD SEAL NO LEAKS: Constructed of premium-grade material for better sealing performance without leakage. good abrasion resistance, decent tensile strength. Smooth surface, no burrs, better fit and provide long-lasting and reliable use without deformation
PREMIUM QUALITY: Complete with all necessary seals and o-rings, this cylinder rebuild seal kit guarantees long-lasting durability and reliability.
1.Cylinder tube Bore (I.D.) 4.0" x rod (O.D) 1.75". Please note some cylinder rod head OD size is not rod size.
2. Wear rings. Piston wear ring : 101.6 mm ( OD 4") x 95.25mm (ID 3.75") x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: D101.6 mm x91.6mm x 3.28mm; O-ring (installed under the square ring): 91.0 mm x 2.65 mm . CPU + NBR
4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
Below is 4.0"Bore x 1.75" rod cylinder Specification that made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4”
Part Type:cylinder rebuild seal kit
Seal Size: 4.0"Bore x 1.75"
Material :Rubber Plastic
11Pcs/Set Log splitter cylinder rebuild seal kits
1)All items will be shipped to your ebay address .Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address.
2)All items will be shipped in 1-2 business days (excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.
3)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.
We accept PayPal Only！
Import duties, value added taxes and any other charges are not included, Buyers are responsible for import duties, custom fees and taxes, if any.
Please check with your country's custom office to determine the additional costs impose on the item prior to buying.
We are absolutely NOT responsible for any import tax or Customs duty.
Return is accepted within 30 days after the buyer receiving the item.
Returned item has to be in its original condition,Return shipping is to be paid by the Buyer.
Store Categories
