When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay.
Mag Hytec Rear Differential Cover For 85-Older Ford F250 F350 Truck Van Dana# 70
This product data sheet is originally written in English.
![](https://i77.photobucket.com/albums/j46/azoffroadperformance/AZOffroadWebLogo1_zps16a20655.png)
This is a brand new Mag-Hytec Differential Cover with full factory warranty. We are an Authorized Dealer of Mag-Hytec and carry the full line of products.
![](https://i77.photobucket.com/albums/j46/azoffroadperformance/Mag-HytecLogo.jpg)
Fits the following applications:
Ford '85 and older - F-250 and F-350 Trucks and E-350 Vans
Ford Vans E-250 Use for Dana rear
Overall height 4 1/8"
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 6 Quarts
Part #: Dana #70
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.
Avoid costly reapirs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer
Average of double the fluid capacity
Ease of Service
The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling.
The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed.
The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone.
Plugs, cap screws and washers are stainless steel in most applications.
Mag-Hytec manufactures the best covers and pans available today.
![](https://i77.photobucket.com/albums/j46/azoffroadperformance/Mag%20Hytec/Dana%2070_zps1owd24tm.jpg)
Welcome to the AZ Offroad & Performance eBay Store!
We appreciate your business. To make your shopping experience as simple and easy as possible, please refer to our company policies shown below.
Payment Information:
-
We accept PayPal and all major credit cards using PayPal.
-
We accept PayPal eChecks. Just like a regular check, it usually takes between 3 and 5 business days for an eCheck to clear in our business PayPal account.
For shipment to an Arizona address, we are required to collect 9.3% sales tax.
We suggest immediate payment for all orders, but do allow 10 days from the date of purchase for payment to be received.
If payment is not received within 10 days of the order being placed, an Unpaid Item Case will be opened.
-
For international shipments, orders may be subject to additional duties, taxes, charges, fees, and costs associated with the shipment of the item once it has reached its destination. These charges are the buyer's responsibilty.
-
-
Most orders will ship within 1-3 business days from the time payment is received and cleared.
-
Shipments are not made on weekends or holidays.
-
Please contact us for a shipment quote to your location.
-
Some out of stock items are drop shipped from a distribution warehouse or directly from the manufacturer, so tracking information may not be available immediately.
-
Tracking numbers will be updated to as quickly as possible once an order has processed and shipped. Tracking numbers are updated manually, so please allow enough time for your information to be entered after your order has been placed.
Return Policy:
-
AZ Offroad & Performance, Inc. & will do everything possible to ensure the customer's satisfaction.
-
If there is any error in the part received, please contact us immediately.
-
Returns will be accepted if the item is unused, uninstalled, in the original packaging and in brand new condition. Items that are defective may also be returned. We are not responsible for install mistakes. Items must be returned within 30 days from the purchase date.
-
All returns must be approved and issued a (Return Authorization) RA # for return. The RA # must be on the outside of each package with the RA # in a visible area. Any package without the RA # will be refused.
-
-
Returns may be subject to a 20% restocking fee.
-
Once items have been received & inspected per our guidelines, a credit or refund will be issued to the customer.
-
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load. Returns will be accepted if the item is unused, uninstalled, in the original packaging and in brand new condition. Items that are
Warranty |
Yes |
Placement on Vehicle |
Rear |
Brand |
MAG-HYTEC |
Manufacturer Part Number |
Dana #70 |
Part Brand |
Mag-Hytec |
Type |
Cover |