NEW ON MARKET! FREE EXPEDITED SHIPPING WORLDWIDE!


GX112 Super-compact Series are the smallest potentiostat instruments on the market! 

Just 39x 17x 8 mm and 6 grams!

 

GX112 is an extended range, dual channel instrument for two electrode (WE and RE/CE), three electrode (WE, CE and RE) and four electrode (WE1, WE2, CE and RE) configurations of electrochemical cells.

 

Compatible with all popular Screen Printed Electrode (SPE) sensors in the market: 

  • 3x0.1" pitch for DropSens, Metrohm Autolab, BVT, Basi and Zimmer Peacock type sensors, 
  • 4x0.1" pitch for S1PE, Micrux Technologies type sensors
  • 3x0.16" pitch for Zensor type sensors
  • 3x2mm or 4x2mm banana plug adapter for conventional type cells
  • Thin film electrode sensors and other custom electrochemical cells can also be connected using a GPSI (GalvanoPlot Standard Interface) adapter.
  • Adapters for custom electrode systems are also available


Runs most popular electrochemical protocols like:

  • Linear Sweep Voltammetry (LSV)
  • Cyclic Voltammetry (CV)
  • Square Wave Voltammetry (SWV)
  • Normal Pulse Voltammetry (NPV)
  • Differential Pulse Voltammetry (DPV)
  • Amperometry (A)
  • Chronoamperometry (CA)
  • Open Circuit Potential (OCP)
  • Galvanostatic mode PSA (G)
  • Impedimetry (I)
  • Electrochemical Impedance Spectroscopy (EIS)

 

USB-C interface for PC and Android connectivity and powering. Multiple devices can be controlled from the same software.

 

Compatible with GalvanoPlot Suite and GalvanoPlot Touch applications: 

  • GalvanoPlot Suite can run on Windows PCs Win10 and over. Multiple instrument support: Up to 256 GalvanoPlot instruments can be connected and controlled from the same PC interface, including parallel processing of sensors on different devices and combined analysis of data.
  • GalvanoPlot Touch is an Android Application for Android OS. Multiple Bluetooth instrument control plus a single direct instrument control over USB-OTG.

 

Technical Specifications:

  • Compliance Voltage: -3V to +2.3V
  • Bias Voltage Range: ±2V
  • Bias Voltage Resolution: 0.5mV
  • Current Read Resolution: 1pA
  • Current Read Range: 8 ranges (10nA to 1.5mA) and Autorange
  • Bi-potentiostat mode (Repeat, Bias and Constant)
  • Real time OCP measurement
  • EIS: 15mHz-200KHz, >99,5% accuracy in most measurements.


What is included:

- GX112 Supercompact Bi-Potentiostat/ EIS Analyzer

- GalvanoPlot Controller PC Software 

- Dummy cell for test and calibration

- SPE Interface of your choice (3x0.1"/4x0.1"/3x0.16") or GPSI adapter for other sensors. Please specify your Interface choice and Pin-out order in your order note to avoid incompatibility!


* GalvanoPlot Suite PC Software License (Only comes with Software Package)

 

**You will get a GX112 with your favorite sensor interface and an unlimited license (does not expire, unlimited number of PCs to be installed) for GalvanoPlot SUITE for just $950!** 


What is optional:

- Custom interface is also available (If you make your own Screen Printed Electrode or use a peculiar one. May be Free or +$50 if it is not compatible with one of the most popular types)

- Extra SPE adapters (Extra SPE interfaces makes your device compatible with all popular SPE types in the market. User replacable, $50 each type)

- USB-C to USB-A adapter (If your computer does not have a USB-C port, +$10)

- GalvanoPlot SUITE License (GalvanoPlot Controller free PC software enables you to setup the device, run an experiment and visualize the signal graph. But most of the other important properties like saving and loading an experiment, spooling list, analysis of peaks, multiple experiment control, upgrade and more comes with GalvanoPlot SUITE. License to register a single device for unlimited number of computers is $400. But GX112 can be purchased with a license for SUITE only for $950 (instrument+software).