Type | Solenoid Valves | Application | Single Use |
---|---|---|---|
Number of Ports | 4-Port Valve | Mounting Orientation | Direct |
Specifications | Standard / Low Current | Number of Solenoids | [Single] Single |
Switching Type | 2-Position Exhaust | Status at Power Off | Self-Recovery (Spring Return) |
Voltage | DC24V | Pipe Port Type | M |
Plumbing Thread Nominal | M5 | Applicable Cylinder Dia.(Ø) | 16 or less |
Show More |
SMC Solenoid Valve.
[Features]
· Suitable for cylinder actuation (up to ø16)
· Compact size with a width of just 15 mm
· Low power consumption: 1.8 W DC
Valve type | Pilot operated 4-port switching solenoid valve |
---|---|
Usable Fluids | Air |
Operating Pressure Range MPa | 0.15 to 0.7 |
Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) |
*1: Response time (ms) (at 0.5 MPa) | 15 or less |
Maximum Operating Frequency Hz | 15 |
Effective area | See table below |
Lubrication | Not required |
Manual Operation | Non-locking, push type |
Exhaust throttle | Not available |
Mounting Orientation | Free |
*2: Impact Resistance / Vibration Resistance: m/s2 | 300/50 |
Enclosure | Dust-proof |
*1: Based on JIS B 8375-1981 dynamic performance testing. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 1,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)