UeeVii CPE453 is a high-performance enterprise-class outdoor wireless digital bridge that supports 802.11ac technology. WiFi bridge operates in the 5.8G wireless band. It has unique digital tube pairing technology, no computer configuration, easy to finish point-to-point, point-to-point (less than 8 points) equipment matching. With a 100M network interface. The power supply mode is flexible, supporting a 24V PoE network cable power supply and 12V 1A DC local power supply, and the distance of the network wire supply can reach 50-70 meters(Related to the material of the netting twine). The outdoor IP65 is designed for a windbreak, rain protection, dustproof, and sun protection, and it is easy to adapt to all kinds of harsh outdoor environments. The device is equipped with a 14dBi dual intensifying plate antenna, and its installation is simple and fast. It has high performance, high gain, high receiving sensitivity, high bandwidth, and so on. It greatly enhances the performance and stability of wireless transmission and is widely used in medium and short-range video transmission and data transmission.
|
|
|
|
---|---|---|---|
Indicator Lights & Digital TubeYou can know the pairing status, signal strength status, and power status of the wireless bridge through the indicator lights; know the current configuration number through the digital tube, and switch other numbers through the "RST" button. |
24V PoE Power SupplyCPE453 point to point bridge supports 24V PoE power supply, and the PoE power adapter is included in the package; use the network cable as the power cable to connect the PoE port of the PoE power adapter and the LAN/PoE of the wireless bridge to supply power; 12V 1A DC power supply is not included in the package, PoE power supply is recommended. |
Master/Slave Toggle ButtonMaster bridge or the slave bridge mode of the wireless bridge can be switched by the M/S button; In point-to-point applications, one of the bridges is used as the master bridge, and the other bridge is used as the slave bridge to achieve the wireless transfer function. UeeVii wireless bridge will be pre-paired with 2 bridges, you can connect other devices to use. |
Pillar InstallationPlace the CPE to the selected position and adjust the CPE front panel orientation to be approximately the same as the selected direction, then use the ties to fix the CPE, the bracket is not included in the package. Recommended UeeVii Universal Bracket (ASIN: B09NLLG8MZ). |
|
|
|
---|---|---|
Lane Monitoring ApplicationDisplay your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs. |
Elevator Monitoring ApplicationUsing a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse. |
Network Extension ApplicationExtend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money. |
Point to Point Pairing:
1) Move the M/S Button to "M" as the master bridge, and the other to "S" as the slave bridge;
2) Short press the "digital switch/reset" button, the value of the digital tube will be +1 every time you press it;
3) Set the 2 bridges to the same value and wait for 2 minutes to pair;
4) When the SIG1-4 indicator of the slave bridge is always on, it means the pairing is successful.
Point to MultiPoint Pairing(up to 1 point to 8 points):
1) Move M/S button bridge to "M" as the master bridge, and dial the other bridges to "S" as the slave bridge;
2) Short press the "digital switch/reset" button, the value of the digital tube will be +1 every time you press it;
3) Set all bridges to the same value (complete the setting within 5 minutes), wait 2 minutes for pairing;
4) When the SIG1-4 indicator of the slave bridge is always on, it means the pairing is successful.