[2023 Elite Version] ANCEL Automotive EVAP Smoke Machine Leak Detector with Service Port Adapter, 12V Small Car Vacuum Smoke Tester Diagnostic Test Tool for All Vehicle
 |  |  | |
| Model | ANCEL S100 (Buy it now) | ANCEL S1000 (Buy it now) | ANCEL S3000 (Buy it now) |
| Price | $89 | $149 | $179 |
| Built-in Air Pump | YES | YES | |
| Pressure Gauge | YES | ||
| Flow Control Valve | YES | ||
| Output Pressure | 0.5 PSI | 0.5-8 PSI | 0.8-14.5 PSI |
| Output Flow | 4 L/min | 5 L/min | 6 L/min |
| Weight | 3 Pounds | 4.88 Pounds | 5.13 Pounds |
| Accessories | Service port adapter | Cone leak detector & intake adapter | Cone leak detector & intake adapter |
| Smoke & Air | Only Smoke Mode | Smoke & Air | Smoke & Air |
Package List | 1pc * ANCEL S100 Main Unit 1pc * Power Cord 1pc * Hook up 2pc * EVAP Kit 1pc * Smoke Delivery Hose 1pc *Air Adpt | 1*ANCEL S1000 Car Smoke Leak Detector 1*Power Cord 1*Funnel 1*Hook up 1*Manual 1*Intake Bladder 1*Smoke Delivery Hose 1*Adapter Cone 1*Intake Bladder Replacement Rubber 1*Carton | 1*ANCEL S3000 Main Unit 1*Power Cord 1*Funnel 1*Hook up 1*User Manual 1*Intake Bladder 1*Adapter Cone 1*Replacement Rubber 1*Smoke Delivery Hose |
 |  |  |
- EVAP SYSTEM TEST: Leakage in the fuel evaporation system causes fuel vapour to escape into the atmosphere, resulting in waste and pollution or unstable engine idling.
- EXHAUST SYSTEM TEST: Uncleaned harmful gases escaping into the atmosphere or increasing the noise of the vehicle are the main disadvantage when leaks occur in the exhaust.
- FUEL TANK SYSTEM TEST: If there are gaps in the fuel tank and pipes caused by improper installation or insufficient sealing of the fuel tank cap, it may cause leaks in the fuel tank system.
- TEST OF VARIOUS PIPE CONNECTIONS: Smoke test of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
- CAR SEALING TEST: Poor sealing of the car can lead to many inconveniences, such as it is not warm and dusty, not soundproof, not waterproof, etc.
- CRANKCASE SYSTEM TEST: Excessive pressure or corrosion of the crankcase is the main reason why the crankcase seal is damaged and oil leaks.
- INTAKE SYSTEM TEST: A leak in the intake system will result in inadequate intake of the car engine, leading to low engine performance.
- TURBO TEST: The leakage of coolant would cause the engine to indicate a high water temperature.
Specification
- Output Pressure: 7-12 PSI
- Output Flow: <6 L/Min
- Power Supply: 12V automobile Battery 6Amp
- Air Pressure Output: Built-in air pump
- Test Oil Capacity: 10-20ml
- Length of Power Cord: 2.5Meters
- Length of Smoke Hose: 2.5Meters
- Package Weight: 2.3kg/5 lb
- Main Unit Dimensions: 7.28*5.11*3.34 inch
- Package Dimensions: 12.2*9.44*4.52 inch
How to do leakage test?
1. Turn OFF the ignition of the vehicle. LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
2. Dismantle the air filter and the throttle connections.
3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake Adapter into the opening.
4. Connect the Power Cord to 12V vehicle battery.
5. Now the Power LED would be ON, if else check the power supply.
6. Introduce the smoke nozzle into the system via the Adapter Cone.
7. Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter
8. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle.
9. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist.
10. After test, press Smoke Control Switch again to stop the unit from generating smoke and press Air Control Switch to stop generating pressurized air.
11. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.
How to do leakage test ?
Step 1: Fill in 10ml-20ml test oil (baby oil) to the detector
Step 2: Connect the delivery house to the detector
Step 3: Disconnect the pipe that needs to be connect with the detector
Step 4: Connect detector with DC12V battery,device starts to work
Step 5: The pipe will be filled with smoke,check the leak points
ANCEL S200 Car Smoke Leak Detector Features :
1. Pressure Output : 0.8-14.5psi ；The smoke can be produced quickly and diagnosed quickly, saving time.
2. Powerful and easy to operate： ANCEL S200 has a built-in air pump, press the left button to ventilate, press the right button to start the smoke output, It can be outputs lots of Smoke within 30 seconds after turning on， which ensures continuous output of a large amount of smoke. The dense smoke output detects even the smallest leaks and helps you diagnose faults quickly and accurately. Significantly improves the efficiency of diagnosis.
3.Wide range of applications： For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models.
4.Overheat & Anti-frost protection： The detector has smart protector. If it exceeds working limit,for e.g over 75℃. It will power off automatically.
Specification
Power source:12V Fully Charged vehicle battery
Current:6A
Flow rate: <6 L/min
Pressure output:0.8-1.0 bar (0.8-14.5psi)
PACKIING LIST
1pc Power Cord
1pc DeliveryHose
1pc Funnel
1pc Intake Bladder
1pc Service Replacement
1pc Adapter Cone Set
1pc EVAP Adapter
1pc Removal Tool
1pc EVAP Removal Tool
