Pudin Thermostatic Bathroom Modern Chrome Bath Shower Mixer Anti Scald Tap


If there is impurity and dirt effect when using, need to disassemble spool for cleaning, as follows: 1.Remove the fixing screws on the back of the thermostat faucet and pull out the spool 2.Be careful not to remove the wheels from the spool 3.Use a toothbrush or brush to clean the strainer on the spool, then rinse the dirt out of the screen 4.Put the spool back into the faucet and screw it at the end This thermostatic bath shower would not look out of place in the most expensive of houses, The round shaped to all components make it exceedingly modern and a stylish choice for your bathroom, cloakroom & en suite.   Inside is a thermostatic cartridge to keep the water temperature relatively constant even when the pressure of the hot or cold feeds fluctuates.   Elegant in design yet easy to install and operate.  The separate flow and temperature controls offer easy functionality and stylish looks.   This shower has the ability to enhance any bathroom with its modern and quality design.  Exposed Thermostatic Shower Valve With Bath Filler Spout.  Valve made from Solid Brass. Diverter to switch between bath filler. Latest ceramic disc technology  Operating range 20 - 50 degrees C.  Anti-scalding device set at 38 degree C, can be overridden from temperature control.   Solid Chrome Plated Brass Construction  QUARTER TURN FLOW AND TEMPERATURE CONTROLS  With temperature safety override button  Requires 2 tap holes when fitting  Bath Tap hole Centers 180 mm  Thermostatic bath shower works on water systems that produce a minimum of 1 - 10 bar water pressure.
1.Exposed Thermostatic Shower Valve With Bath Filler Spout. Diverter to switch between bath filler 2.This can be achieved by using one of the following systems: Combination boiler systems Gravity fed systems (only with a pump) Megaflow system Pumped hot water systems Un-vented hot water systems Standard pressurized hot water cylinder type systems All Products are manufactured utilising WRAS approved materials. 3.Bath Legs not included 4.Anti-corrosion & Durable:The body is made of soild brass, chrome-plated 5.The distance between the hot water inlet and cold water inlet is: 150mm