UeeVii CPE830 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE820 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder. The AP can be receiving wireless data transmitted from multiple Clients, and it is easy and convenient for centralized management of the remote equipment. CPE is widely used in highways, reservoir river monitoring, elevator monitoring systems, site crane monitoring systems, port terminal monitoring systems, marine aquaculture monitoring systems, and so on. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.
Package Included:
2 * CPE830 Gigabit Bridge
2 * Gigabit POE Adapter (24V)
2 * Cat 5e Network Cable
2 * Metal Hoop
1 * User Manual
We have a second building that is about 150' from our main building and needed stable internet for both employees and security systems. I tried reaching it with our mesh routers, but even placing one on an outside wall wouldn't supply a stable signal. We could have installed a second modem/router but that would add hundreds to our initial install and monthly costs. Installing this bridge has offered a stable signal and wiring it into a mesh system, it has allowed us to expand our net throughout the second building.
|
|
|
|
---|---|---|---|
Helpful Indicator LightsChange the characters of the digital tube at the bottom of the wireless bridge to modify the pairing signal channel. The steady light state indicates that it is working, and the blinking state indicates that it is being set. The lights on the sideshow the power and LAN connection status, and the signal lights indicate the signal strength of the paired 2 bridges. |
Only One 1Gbps PostThe wireless bridge has 1 100Mbps and 1000Mbps RJ45 ports, both of which can accept a 24V PoE power supply, recommended to connect a gigabit port, and the CAT 5e network cable can be used as a power cable to supply power and transmit data. DC power supply is not recommended. The PoE adapter has a PoE port and a LAN port, and only the PoE port supplies power. |
Switch Master-slave BridgePoint wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing. |
Easy InstallationYou can fix the point-to-point bridge on the bracket (ASIN: B09NLLG8MZ) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the UeeVii Universal Bridge Bracket. |
|
|
|
---|---|---|
Lane Monitoring ApplicationDisplay your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs. |
Elevator Monitoring ApplicationUsing a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse. |
Network Extension ApplicationExtend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money. |
This describes the setup of the Master bridge and 3 Slave bridges
1. Slide one unit’s A-B switch to A (Master Bridge) and the remaining 3 units to B (Slave Bridge);
2. Connect the PoE power supplies to each unit using the Ethernet cables as above ;
3. Plug in the power supplies to provide power to the CPE830s;
4. Wait for them to power up, about 2 minutes;
5. Click the reset button to select a channel with a letter. Included 1,2,3,..., A,B,C,...,F.
6. Then on the other 3 units do the same. All units need to be on the same channel;
7. Wait for 2-5 minutes to complete the pairing. When the number of the digital display is solid and the 4-grid signal light on the side turns on, it means their pairing is successful;
8. Finally connect other devices (Router, PC, Switch, etc.) and install them on the Slave units through the LAN port and verify connectivity.
Purchase Tips: The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. If the product is damaged or missing accessories, please let us know to reissue a new set. This CPE cannot directly expand the WiFi range for you. If you have any questions, you can free feel to let us know via Amazon or Email, we will quick response and help you solve your questions.
How to find and change CPE830 WiFi SSID and password?
1. Find the WiFi hotspot password of CPE830, path: Setting-->Wireless--> Name(SSID) and Password.
2. Enter the new SSID and password and save.