Descriptions
.jpg)
I. About the 3rd Generation TB6560 Stepper Controller Box
This stepper controller box has been upgraded to an intelligent and industrial-level driver board set. The redesigned PCB board enables smoother control of motors. The totally enclosed optical isolation and bipolar constant-current chopper ensure a low noise & low vibration operation environment, helping to avoid creeping at a low speed. Internally built manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs.
II. Standard Version VS Professional Version
|
Functions
|
Standard Version |
Professional Version
|
| Intelligent motor control via PC |  |
|
| Manual motor control via control panel | |
|
| Intelligent switch between PC and control panel | |
|
| Synchronous coordinates display on PC and display panel | |
|
| Real-time tracking of motor moving path | |
|
| Aluminum & high intensity PVC housing protection | |
|
| Automatic G-code recording |  |
|
| Manual G-code programming | |
|
III. Two Unique Functions of Professional Version
Automatic G-code recording function
With the embedded intelligent memory chip, this stepper driver can easily record MAXIMUM 3 Axis' (X,Y,Z Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer, after which you can run motors using the recorded G-code without computer.
Manual G-code programing function
The upgraded built-in manual control tools (display panel and control panel) can not only be used for manual motor control, but also manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc.
This package is 3 Axis Professional Version (TB3CD-P (Box)).
If you need the standard version, please refer to our related item or simply contact us.
PCB Instructions & Specifications
Display Panel & Control Panel
High performance, cost-effective
Manual motor control via control panel; support tool-settings on X, Y, Z Axis without computer
Automatic identification and intelligent switch between computer and control panel
Synchronous coordinates display on computer and display panel, up to 3 axis (X, Y, Z axis)
Real-time tracking of motor moving path
Automatic G-code recording for motor control
Manual G-code programming for motor control without computer
1, 2, 8, 16 adjustable microstep control for more accurate and smoother motor running
Two-stage signal processing, smooth signal transmission
Automatic idle-current reduction, powerful anti-jamming capability
Overload, overcurrent, overvoltage, overheat protection
5 types of input control on manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
Four types of output current adjustable
With 0-10V PWM signal output port for speed adjustment and one relay control port
Aluminum & high intensity PVC Box Design for better cooling effect and item protection
Compatibility with Mach2, Mach3(Recommended Software), Linux CNC (EMC2), KCAM4 CNC Software, etc
Suitable for 2 or 4 phase stepper motors with 0.5-3.5A (PEAK) rated current
For processing various pattern mould
For designing of brand, architecture mould, badge, nameplate, display boards, doorplate, furniture decoration in advertising industry
For carving portrait, scenery, handwriting, sealing, etc
Suitable for any small-and-medium automatic equipments with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices
| Microstep Resolution Selection | ||
|
Microstep Resolution
|
SW1 |
SW2
|
| 1 | ON | ON |
| 2 | OFF | ON |
| 8 | OFF | OFF |
| 16 | ON | OFF |
| Decay Mode | ||
|
Decay Mode
|
SW3 |
SW4
|
| 25% | ON | ON |
| 50% | OFF | ON |
| 75% | ON | OFF |
| 100% | OFF | OFF |
| Output Current Selection | ||
|
Output Current
|
SW5 |
SW6
|
| 100% | ON | ON |
| 75% | OFF | ON |
| 50% | ON | OFF |
| 25% | OFF | OFF |
Note: If the drive board has abnormal noise under working or locking condition, please try adjusting the decay mode to solve the problem.
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
(High voltage will burn out the chips or stepper motors!!! please be careful in choosing power supply.)
Output current of the power supply can be calculated by the following formula
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 2A Nema 23 stepper motors, theoretically 24V 8A DC power supply is recommended, but higher power such as 24V 10A/15A will also be good. If you are not sure about the selection of power supply, please feel free to contact us.) Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.)
Specifications
| Electrical Specifications Of Stepper Driver | |
|
Input voltage
|
12V-32V DC |
| Output current | 0.5A-3.5A (Peak) |
| Drive type | Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output) |
| Suitable motor | Nema17, Nema23, Nema24 |
| Net weight | Approx. 650g |
| Dimensions | 177x147x46mm |
| Operating Environment | ||
|
Cooling
|
Natural Cooling or Fan Forced cooling
|
|
|
Operating Environment
|
Environment
|
Avoid dust, oil fog, corrosive gas
|
|
Ambient Temperature
|
0°C-50°C (32°F-122°F) | |
|
Humidity
|
40%RH-90%RH | |
|
Operating Temperature
|
70°C (158°F) Max | |
| Storage Temperature | -20°C-65°C (-4°F-149°F) | |
Content
Services
| Estimated Delivery Time(Subject to Stock Availability) | ||
| USA (excl. Alaska, Hawaii, Puerto Rico) | USPS First-Class Package/ UPS SurePost/ UPS Ground | 3-7 business days |
| Other Countries (May depart from other stock location) | International Airmail Service | 12-21 business days |
- • Need the item urgently.
- • Require that the item should be delivered within a certain time.
- • Have any other questions/requirements about delivery.
- • Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
- • Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
- • It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
- • Please contact us if you have any trouble in receiving your orders. We will help you to track them.
- • We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge)
-
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
- • Payment is required within 5 days after auction ends.
- • All sales are final. Shipping and handling charges are not negotiable.
- • Your PayPal shipping address will be used for delivery BY DEFAULT unless otherwise informed.
- • Please double-check to make sure your PayPal shipping address is correct before making payment.
- If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.
- If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
- We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
- • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
- • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.