I. About the 3rd Generation TB6560 Stepper Controller Box
This stepper controller box has been upgraded to an intelligent and industrial-level driver board set. The redesigned PCB board enables smoother control of motors. The totally enclosed optical isolation and bipolar constant-current chopper ensure a low noise & low vibration operation environment, helping to avoid creeping at a low speed. Internally built manual control tools bring more user friendly experience. It has standard version and professional version to meet different user needs.
II. Standard Version VS Professional Version
Functions
|
Standard Version |
Professional Version
|
Intelligent motor control via PC | ||
Manual motor control via control panel | ||
Intelligent switch between PC and control panel | ||
Synchronous coordinates display on PC and display panel | ||
Real-time tracking of motor moving path | ||
Aluminum & high intensity PVC housing protection | ||
Automatic G-code recording | ||
Manual G-code programming |
III. Two Unique Functions of Professional Version
Automatic G-code recording function
With the embedded intelligent memory chip, this stepper driver can easily record MAXIMUM 3 Axis' (X,Y,Z Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer, after which you can run motors using the recorded G-code without computer.
Manual G-code programing function
The upgraded built-in manual control tools (display panel and control panel) can not only be used for manual motor control, but also manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc.
This package is 3 Axis Professional Version (TB3CD-P (Box)).
If you need the standard version, please refer to our related item or simply contact us.
PCB Instructions & Specifications
Display Panel & Control Panel
High performance, cost-effective
Manual motor control via control panel; support tool-settings on X, Y, Z Axis without computer
Automatic identification and intelligent switch between computer and control panel
Synchronous coordinates display on computer and display panel, up to 3 axis (X, Y, Z axis)
Real-time tracking of motor moving path
Automatic G-code recording for motor control
Manual G-code programming for motor control without computer
1, 2, 8, 16 adjustable microstep control for more accurate and smoother motor running
Two-stage signal processing, smooth signal transmission
Automatic idle-current reduction, powerful anti-jamming capability
Overload, overcurrent, overvoltage, overheat protection
5 types of input control on manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
Four types of output current adjustable
With 0-10V PWM signal output port for speed adjustment and one relay control port
Aluminum & high intensity PVC Box Design for better cooling effect and item protection
Compatibility with Mach2, Mach3(Recommended Software), Linux CNC (EMC2), KCAM4 CNC Software, etc
Suitable for 2 or 4 phase stepper motors with 0.5-3.5A (PEAK) rated current
For processing various pattern mould
For designing of brand, architecture mould, badge, nameplate, display boards, doorplate, furniture decoration in advertising industry
For carving portrait, scenery, handwriting, sealing, etc
Suitable for any small-and-medium automatic equipments with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices
Microstep Resolution Selection | ||
Microstep Resolution
|
SW1 |
SW2
|
1 | ON | ON |
2 | OFF | ON |
8 | OFF | OFF |
16 | ON | OFF |
Decay Mode | ||
Decay Mode
|
SW3 |
SW4
|
25% | ON | ON |
50% | OFF | ON |
75% | ON | OFF |
100% | OFF | OFF |
Output Current Selection | ||
Output Current
|
SW5 |
SW6
|
100% | ON | ON |
75% | OFF | ON |
50% | ON | OFF |
25% | OFF | OFF |
Note: If the drive board has abnormal noise under working or locking condition, please try adjusting the decay mode to solve the problem.
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
(High voltage will burn out the chips or stepper motors!!! please be careful in choosing power supply.)
Output current of the power supply can be calculated by the following formula
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 2A Nema 23 stepper motors, theoretically 24V 8A DC power supply is recommended, but higher power such as 24V 10A/15A will also be good. If you are not sure about the selection of power supply, please feel free to contact us.) Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.)
Electrical Specifications Of Stepper Driver | |
Input voltage
|
12V-32V DC |
Output current | 0.5A-3.5A (Peak) |
Drive type | Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output) |
Suitable motor | Nema17, Nema23, Nema24 |
Net weight | Approx. 650g |
Dimensions | 177x147x46mm |
Operating Environment | ||
Cooling
|
Natural Cooling or Fan Forced cooling
|
|
Operating Environment
|
Environment
|
Avoid dust, oil fog, corrosive gas
|
Ambient Temperature
|
0°C-50°C (32°F-122°F) | |
Humidity
|
40%RH-90%RH | |
Operating Temperature
|
70°C (158°F) Max | |
Storage Temperature | -20°C-65°C (-4°F-149°F) |
Estimated Delivery Time(Subject to Stock Availability) | ||
USA (excl. Alaska, Hawaii, Puerto Rico) | USPS First-Class Package/ UPS SurePost/ UPS Ground | 3-7 business days |
Other Countries (May depart from other stock location) | International Airmail Service | 12-21 business days |