  |
| Features & Specifications: |
MPX690.3 Pro
- 38 mm pure copper woofer voice coil wound on a Polyamide former for exceptional power handling and dynamic compression-free reproduction.
- Pressed-pulp cone with cotton fibers material, combining stiffness and lightweight for a wide frequency response.
- Large rubber surround designed for long throw and optimal sound damping.
- Over-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.
- Aerodynamic thus acoustically transparent aluminium alloy basket, eliminates rear wave reflections.
- Anti-vibration rubber magnet cover, damps spurious vibrations.
- 28mm voice coil Neodymium Tetolon fiber dome tweeter, for undistorted mid-frequency reproduction.
- 20mm voice coil Neodymium Tetolon fiber dome super tweeter, to naturally compensate for drop-off in frequency response due to speaker horizontal installation.
- Tweeter faceplate with geometry optimized with FEM (Finite Element Modeling) simulations, to provide excellent off-axis frequency response up to 24kHz by perfectly mixing the two tweeters’ emission.
- Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
- Power Handling
- 260W Peak
- 130W RMS
- Impedance: 4-Ohm
- Frequency response: 30 ÷ 24k Hz
- Sensitivity: 94dB SPL
- Woofer size mm (in.): 6 x 9
- Tweeter size mm (in.): 35 (1.4)
- Supertweeter size mm (in.): 29 (1.14)
- Woofer Voice Coil Ø mm (in.): 38 (1.5)
- Tweeter voice coil Ø mm (in.): 28 (1.1)
- Woofer magnet: High density flux ferrite
- Tweeter magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibers
- Tweeter dome: Tetolon
- Supertweeter dome: Tetolon
- Top Mount Depth: 3.54"
MPX165.3
The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.
Specifications:
- Power Handling:
- 220 Watts Max
- 110W RMS
- Impedance: 4-Ohm
- Frequency response Hz: 40 ÷ 22,5k
- Sensitivity: 92dB SPL
- Voice coil Ø mm (in.): 25 (1)
- Woofer size mm (in.): 165 (6.5)
- Tweeter size mm (in.): 29 (1.14)
- Woofer magnet: High density flux ferrite
- Tweeter magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibers
- Tweeter dome: Tetolon
- Crossover type: 2 Way Passive Crossover
- Crossover cut off: 3,5 kHz
ML POWER 4
- ADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response with unmatched power efficiency
- Thermally optimized double extruded heat sink featuring die-cast aluminium ergonomic terminals
- 250 W x 4 (2Ω) RMS power boasting hi-end quality
- 12 dB/Oct. continuously adjustable (50 to 5k Hz and 80 to 3.3k Hz) active crossover featuring Lo-Pass/Hi-Pass or Full Range settings
- Specific A/B Input switch, eliminates the need for RCA Y-AdaptersML Power IN with balanced Speaker In inputs for an increased noise rejection and RCA In
- Operating status real time monitoring through 4 LEDs
- Pre-out full range outputs also available with Speaker In inputs;
- ART™ (Automatic Remote Turn On-Off).
- Channel mode: 4 - 3 - 2
- Output Power (RMS): @ 14.4 VDC
- 4 Ch:
- 150 W x 4 (4Ω)
- 250 W x 4 (2Ω)
- 3 Ch:
- 150 W x 2 (4Ω) + 500 W x 1 (4Ω)
- 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
- 2 Ch: 500 W x 2 (4Ω)
- Filters:
- Bypass: Yes
- Hi-Pass:
- A: 50 ÷ 5k @ 12 dB/Oct.
- B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
- Lo-Pass:
- A: 50 ÷ 5k @ 12 dB/Oct.
- B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
- Distortion - THD: (100Hz @ 4Ω): 0.08 %
- S/N Ratio (A weighted @ 1V): 100 dB
- Damping factor (100Hz @ 4Ω): 80
- Approximate Dimensions:
- Height: 1.84"
- Width: 6.69"
- Depth: 11.38"
| International Shipping: |
Free shipping DOES NOT APPLY to Puerto Rico, Hawaii, Guam, Alaska or any country outside of the United States.
Please message us for shipping quotes.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
| : |
Each and every product for sale on ebay.com by woofersetc is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#.
In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product.