Function/Arbitrary Waveform Generator Dual Channel Outputs 26 MHz ±1ppm Accuracy
Please contact us if you need options.
Overview:
The Function/Arbitrary Waveform Generator is a signal generator with extended fine-difference technology that provides better performance, improved fidelity, and flexibility than previous DDS signal generators. It can be built-in with an arbitrary waveform signal generator module. Its many capabilities make this instrument the preferred choice for your current and future measurement solutions. It can help you accelerate development and improve product quality and reliability!
Features :
Parameter :
Technical indicators | |||||
Sine wave | 1μHz ~ 26 MHz | 1μHz ~ 36 MHz | 1μHz ~ 46 MHz | 1μHz ~ 60 MHz | 1μHz ~ 80 MHz |
Square, Pulse | 1μHz ~ 20 MHz | 1μHz ~ 20 MHz | 1μHz ~ 20 MHz | 1μHz ~ 20 MHz | 1μHz ~ 20 MHz |
Ramp Wave | 1μHz ~ 1MHz | 1μHz ~ 1 MHz | 1μHz ~ 1 MHz | 1μHz ~ 1 MHz | 1μHz ~ 1 MHz |
Arbitrary Wave | 1μSa/s ~ 50 MSa/s | ||||
Noise | White noise with 30 MHz bandwidth | ||||
Resolution | 1μHz | ||||
Accuracy | ±1ppm (with optional TCXO clock) | ||||
Sinusoidal Wave Spectral Purity | |||||
Harmonic Distortion | < -70dBc < 20kHz < -50dBc 20kHz ~ 1MHz | ||||
< -40dBc 1MHz ~ 30MHz < -30dBc 30MHz ~ 80MHz | |||||
Parasitic signals | ≤ 10MHz : <-70dBc(typical) > 10MHz: <-70dBc+6dB /octave (typical) | ||||
Phase Noise | 10 MHz,0dBm,10kHz Bias: ≤-125 dBc/Hz (with optional TCXO clock) | ||||
Square wave | |||||
Rising/Falling Edge | 13ns | ||||
Overshoot | ≤2% (50Ω) | ||||
Duty Cycle | 0.01% ~ 99.99% Resolution 0.01% | ||||
Jitter | ≤100ps rms(nominal) | ||||
Ramp Wave | |||||
Linearity | ≤0.1% from 5% to 95% of signal | ||||
Symmetry | 0.00% ~ 100.00% Resolution 0.01% (0% means negative ramp wave, 100% means positive ramp wave, 50% means triangle wave) | ||||
Pulse wave | |||||
Rising/Falling Edge | 13ns ~ 1μs can be changed independently Resolution 0.1ns | ||||
Pulse Width | 21.3 ns ~ period-21.3 ns Resolution 0.1ns | ||||
Overshoot | ≤2% (50Ω) | ||||
Jitter | ≤100ps rms(nominal) | ||||
Noise | 30 MHz bandwidth white noise Repetition period >50 years | ||||
Arbitrary Wave | |||||
Sample Rate | 1μSa/s ~ 50 MSa/s Resolution 1μSa/s | ||||
Waveform Length | 8~16384 Samples Resolution:1Sample | ||||
Vertical Resolution | 14 bits | ||||
Amplitude Characteristics | |||||
Range | 2mVpp~ 20Vpp(High Z) ≤80MHz | ||||
Flatness | <100kHz: ±0.5dB 100kHz ~ 75MHz: ±1dB 75MHz ~ 80MHz: -3dB | ||||
Accuracy | ±1%setting±1mVpp,1kHz sine wave | ||||
Offset Level Range | ±(10 VDC –AC Peak/2) (High Z) | ||||
Modulation Characteristics | |||||
DSSC AM | Modulation depth:0.0%~ 120.0% Resolution 0.1% | ||||
FM | Modulation depth:0 ~(carrier frequency)/2 Resolution 1μHz | ||||
PM | Modulation depth:0.0° ~ 360.0° Resolution 0.1° | ||||
PWM (pulse wave) | Modulation depth:0.0ns ~ width-21.3 ns Resolution 0.1ns | ||||
FSK | Switching rate:1μHz ~1 MHz Resolution 1μHz | ||||
BPSK | Jump phase:0.0° ~ 360.0° Resolution 0.1° Switching rate: 1μHz ~1 MHz Resolution 1μHz | ||||
ASK | Amplitude:2mVpp~ 20Vpp (High Z) Switching rate: 1μHz ~1 MHz Resolution 1μHz | ||||
Scanning Characteristics | |||||
Carrier Waveform | Sine, Square, Ramp, Pulse | ||||
Scan Mode | Linear/Log | ||||
Scan Time | 0.001 s ~ 3600 s Resolution 1mSec | ||||
Burst Characteristics | |||||
Carrier Waveform | Sine, Square, Ramp, Pulse, Arbitrary Waves | ||||
Start Phase | 0.0 ~ 360.0° Resolution 0.1° | ||||
Number of Burst Waveforms | 1 ~ 100000000 Resolution 1 | ||||
Frequency Meter | |||||
Frequency range | 10Hz ~ 250 MHz AC coupling | ||||
Accuracy | 6 bits/sec | ||||
Frequency Sweep Meter (Option) | |||||
Frequency range | 1KHz ~ 80 MHz(Max) | ||||
Dynamic Range | +15dBm~ -60dBm ±1dB(Accuracy) | ||||
Power Meter (Option) | |||||
Frequency Range | 1KHz ~ 100 MHz | ||||
Dynamic Range | +15dBm~ -60dBm ±1dB(accuracy, compensation frequency setting required) RMS value can be displayed at the same time | ||||
Power Signal Output Module (Option) | |||||
Bandwidth | 10Hz ~ 200 kHz | ||||
Output Power | 8W load8Ω Output impedance:2Ω | ||||
Supply Voltage | 100V ~ 240V (47Hz ~ 63Hz) | ||||
Mechanical dimensions | 260mm× 105mm ×290mm |
Instrument Kits and Accessories: