Description
1. Wireless, Blue light
2. Li-On rechargeable
3.Three working models: Full, Ramping, Pulse
4. Time setting: 1, 5, 10, 15, 20s
5. Large capacity battery, A full charge can be used for more than 400times continuously under 10s working time mode
6. Low standby power consumption with seventy days standby time
7. Constant light intensity. The solidification effect is not affected by the consumption of remaining power.
P2 Standard Model 1000-1400mw/cm2
Name: 3 SEC LED Curing Light
Material ：Plastic
LED lamp power: ≤5W
Power source Output: DC 5V/1A
Power input: ~100V-240V，50Hz/60Hz，0.4A(Max)
LED light wavelength: up to 458nm ~ 59mm*63mm*250mm
Atmospheric pressure: 50kPa〜106kPa
Optical effective area of LED: 50mm²
T4 Dental Curing Light LED.B
Feature:
Model:LED.B
Wireless
Long standby time
Working more efficiently
Function Keys:
ON/OFF button：
1.Turn on or turn off the LED blue-ray output
2.Can make the machine run
Time setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s
Technical:
Changer input: AC 110V—240V50—60Hz
The changer output: DC5V 1A
Lithium battery voltage: DC4.2V
Lithium battery capacity:2200mAh
Output optical wavelength:420-480nm
Output light intensity:1200—1500mw/cm2
Package:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
D2 Dental Curing Light
Thank you for choosing D2 curing light unit．This unit is a kind of new type curing device which using the high-power, high—brilliance, pure blue light LED as light source，with the advance light guide rod．
1.The unit is using the LED which has 430—485nm wavelength in the dental operation．
2. LED Screen, easy to check.
3. When works it generates little heat and does not need
a fans to cool the unit ,noiseless and without vibration，
4. This unit has a Li large capacity battery，it can be used for a long one with full charging.
5.Because there are no cables connect to the handpiece，it could be used very conveniently．
6. Three Mode:
“01”Mode：Gradually mode
“02”Mode：Flashing mode．
“03”Mode：All light mode．
7. Automatically power down：when the unit is standby and
without pressing button for 8 minutes，this unit will be turned
off automatically．
8. low battery alert：Every time open the unit power if the voltage of the battery is lower than the set point, this unit will be alarm.
Specification:
Size…………………．dia 22*175mm(unit)
Safety kind……………Ordinary type B．non—continuous service Ip40．Class 2．
Input voltage……………100—240V,50-60HZ(we will send the correct plug according to buyer’s location)
Battery capacity………………·2000Mah
Wavelength………430-485nm
Intensity-………5W≥1800mw／cm2
Solidification effect……20s，>3mm (3W) ，6s，3mm (10W)
Packing List:
1Main unit…………………l set
2Light guide rod…………1 pc
3 Battery………………………1 Pc
4 Charger……………………1 set
5 Adaptor…………………… 1 pc
6 Light cover plate……… 1 pc
7 User manual (English)…………………1 pc
CICADA 1S Dental Curing Light
Technical Parameters:
Light Source: Broad Band LED;
Wavelength Range: 385 - 515 nm;
Light Intensity: > 2300mW / cm²;
Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Adapter Input Power: AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes;
Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure: 700hPa - 1060hPa;
Package Contents:
1 × host handle;
1 × charging base;
1 × power adapter;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. Plug the USB cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.
2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
LA400 Dental Curing Light
5W high power LED
With a maximum more than 1500mW/cm²
Constant light intensity. The solidification effect is not affected by the consumption of remaining power
Elegance design, very convenient for operation
Noiseless operation
Low battery alert
Three working models: strong, gradually strong, flashing
The special design of charger base can be also used for holding the handle
It can solidify 2-3mm deepness in a few seconds
Can be used Worldwide 110V-240V
With blue high sensitive brightness, can cure the resin which the wavelength of 420-460nm
Long standby time of 90 days or more
Suitable for all brands of resin materials
High capacity lithium battery
Specifications:
Capability of battery: 2200mA/h 3.7V
Input Voltage: 110-240V, AC, 50-60Hz
Wavelength: 420-460nm
Light power: 1500mW/cm²
Solidify depth: 5s/3mm
Solidify select: 5s-40s
Battery standby time: 90 days
Full charging to work with 20s each time, can be used continuously more than 200 times
Curing light machine
Light Screen
Guide light head(1pc)
USB Cable
Operating instruction
| Mode | Work time | Function |
| Bright light mode | 1s, 3s, 5s，10s | Achieve fast curing |
| Pulse mode | 5s，10s, 15s, 20s | Intermittent pause to release contraction stress |
| Tapering mode | 5s，10s, 15s, 20s | Reduce shrinkage and prevent microosmosis |
Regulation Number: 21 CFR 872.6070
Product Code: EBZ
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.