Please choose the items you require from the drop down menu.
Please note: The yellow gas hose is not supplied with the changeover kit as standard, if you require a new yellow gas hose these are available to add to your basket by choosing the correct sized hose from the drop down menu. Both hoses are 1/2" Male BSP at one end to screw into the isolator on the changeover valve, the other end is either 15mm or 22mm copper pipe tail. Please make sure you choose the correct size from the drop down menu when adding to the basket.
Details of the LPG Gas Regulator 2 Cylinder Changeover Kit
Kit Includes:
-
Automatic changeover head RF6030 rated at 4.5kg/hr with OPSO feature
-
2 x 20" POL x W20 pigtails
-
Hoses have built in Excess flow & non return valves
-
3/8" Male x 1/2" female outlet test point ball valve included
Safety sign included
Protection cover included
Inlet Connection: 2 x W20
Input Pressure: 20bar
Output Pressure: 37mbar
Output Rating: 4.5Kg/h
Type Of Gas: PROPANE
Diaphram Type: 6000 Series
BS EN 13786 Approved
PLEASE NOTE: The pigtail hoses supplied in this kit are for connection to a standard UK POL (EN 16129 G.7) screw in type propane gas bottles ONLY (see gallery pictures for more details of this fitting).
Details of the 1/2" x 15mm gas hose
This gas hose is suitable to connect changeover regulators and/or meterbox assemblies to pipework of mobile homes and caravans which use 15mm copper pipe.
Material: Plastic Coated Stainless Steel
Length: 1200mm (1.2M)
Internal Diameter: 1/2"
Connectors: Male 1/2" BSP x 15mm Copper Spigot
Gas Type: LPG and NAT
Certified to ISO 10380
Details of the 3/4" x 22mm gas hose
This gas hose is suitable to connect changeover regulators and/or meterbox assemblies to pipework of mobile homes and caravans which use 22mm copper pipe.
Material: Plastic Coated Stainless Steel
Length: 1200mm (1.2M)
Internal Diameter: 3/4"
Connectors: Male 1/2" BSP x 22mm Copper Spigot
Gas Type: LPG and NAT
Certified to ISO 10380
All of our stock parts are sent out same day from our own warehouse stock. If you have any questions please do not hesitate to contact us.
We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.
Catering Parts UK stock a huge line of spare parts to suit all gas and electrical commercial catering equipment, refrigeration equipment, dishwashers and glass washers.
Instructions for use
