Technical Support & Note: The installation of this device requires some network knowledge. When you cannot connect to them, please contact us or look for a professional to assist. 2 CPEs have been paired before sending it to you, you don’t need to pair them again. When the CPE is reset, IP of this setting is 192.168.0.1. After resetting, you can reset the IP address after accessing through 192.168.0.1. Get the latest version of the PDF manual by contacting us.
【What 8881 CPE is】Wireless bridge is a 100Mbps PoE output outdoor wireless WiFi bridge support 2.5KM 5GHz long-range WiFi extender with LED indicator meet with multiple wireless transmission scheme demands. The transmission speed between 2 bridges max is 450Mbps. The highest network speed that can be achieved max is 100Mbps. Outdoor wireless CPE bridge waterproof, dustproof, lighting protection. Operating temperature: -20℃-70℃/storage temp: -40℃-85℃.
【Point to Point Connection Mode】Multi-Mode wireless wifi bridge with an ethernet port and LED indicator. Support wireless AP, wireless signal transmit before 2 houses with 2.5KM distance.
【 How To Use Product 】Wireless bridge LED indicator can show signal strength, easy to set via computer. Setting CPE master mode as AP mode, slave mode as Client mode. Click " Scan" in the settings of the slave mode, scan to the CPE SSID of the master mode to be connected, and then make the connection settings. It transmits via wireless signal, reducing the trouble of wiring cable.
【Widely Applications】Any place required security monitoring by cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor, surveillance networks. Outdoor CPE Connect an IP Surveillance Camera to a secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage.
Product Description
Package Included:
2*POE Power Adapter (DC 12V 1A)
4*Plastic Hoop
1*Quick Start Guide
2*8881 Bridge
Why Choose CPE8881 Wirelss Bridge?
5.8G 100Mbps Data Rate
5.8G 1000Mbps wireless speed ensures high speed internet access and more end users access
High Gain Antenna for More Range
Built-in 14dBi dual-polarized directional antenna (horizontal lobe 60º vertical lobe 25º),stronger signal strength, more wireless coverage
Power over Ethernet - WAN Port support passive PoE
CPE8881 has integrated passivePower over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available.
- Note: This wireless bridge is powered by a PoE adapter through a network cable, so does not require a DC power supply. The DC power adapter and cable are not included in the package.
CPE8881 is an 5.8G outdoor CPE with LED display. it work in pairs for point to point connection,point to multi connection,make more IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
|
|
|
|
|---|---|---|
Wireless PerformanceTwo WiFi Bridge Wireless speeds up to 1000 Mbps on 5GHz,Long-Range WiFi Bridge has LED Display. wireless speed ensures high speed internet access and more end users access |
Long-Range WiFi bridge point-to-pointWireless wifi bridge with ethernet port and LED display, WiFi coverage before 2 houses with 2-2.5KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable. |
Work Even in Extreme WeatherWireless wifi Bridge Waterproof & dust proof & lighting protection Operating Temperature: -20℃-70℃ Storage Temp: -40℃-85℃ |
CPE820:
About this item
-
CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
-
1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.
-
1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability
-
Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.
-
Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450
Product Description
UeeVii CPE820 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE820 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder. The AP can be receiving wireless data transmitted from multiple Clients, and it is easy and convenient for centralized management of the remote equipment. CPE is widely used in highways, reservoir river monitoring, elevator monitoring systems, site crane monitoring systems, port terminal monitoring systems, marine aquaculture monitoring systems, and so on. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.
Package Included:
2 * CPE820 Gigabit Bridge
2 * Gigabit POE Adapter (24V)
2 * Cat 5e Network Cable
2 * Metal Hoop
1 * User Manual
Applications Case
I was looking for a wireless bridge to bring internet connection to my backhouse about 500 feet from the main house, which is too far for wifi range and too long to run the ethernet cable. I connected the adapter to the bridge using the ethernet cable on one end and the other end of the ethernet cable to the main house internet hub. I connected the other adapter to the other bridge using another ethernet cable for the backhouse. I like that the bridges can go very far, up to almost a mile without obstruction, which is ample for my need. Will look to see if the bridge can be connected wirelessly to the hub in the main house.
|
|
|
|
|
|---|---|---|---|
Helpful Indicator LightsChange the characters of the digital tube at the bottom of the wireless bridge to modify the pairing signal channel. The steady light state indicates that it is working, and the blinking state indicates that it is being set. The lights on the sideshow the power and LAN connection status, and the signal lights indicate the signal strength of the paired 2 bridges. |
Only One 1Gbps PostThe wireless bridge has 1 100Mbps and 1000Mbps RJ45 ports, both of which can accept a 24V PoE power supply, recommended to use the 100M port for power supply, and the gigabit port is directly connected to the network, which will make the network speed better. And the CAT 5e network cable can be used as a power cable to supply power and transmit data. DC power supply is not recommended. The PoE adapter has a PoE port and a LAN port, and only the PoE port supplies power. |
Switch Master-slave BridgePoint wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing. |
Easy InstallationYou can fix the point-to-point bridge on the bracket (Not included) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the UeeVii Universal Bridge Bracket. |
|
|
|
|
|---|---|---|
Lane Monitoring ApplicationDisplay your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs. |
Elevator Monitoring ApplicationUsing a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse. |
Network Extension ApplicationExtend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money. |
More Application Scenarios
How to Access and Setting the Wireless Bridge CPE Through Computer Access:
-
Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
-
Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
-
Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
-
Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
-
Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
-
Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
Purchase Tips: The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. If the product is damaged or missing accessories, please let us know to reissue a new set. This CPE cannot directly expand the WiFi range for you. If you have any questions, you can free feel to let us know via Amazon or Email, we will quick response and help you solve your questions.
How to find and change CPE820 WiFi SSID and password?
1. Find the WiFi hotspot password of CPE450, path: Setting-->Wireless--> Name(SSID) and Password.
2. Enter the new SSID and password and save
CPE850
About this item
- 5.8G Gigabit Wireless Bridge & Fast Speed: CPE850 Gigabit wireless bridge is a 5.8G long-range WiFi extender outdoor CPE with a digital tube display. The bridges are built in one 100Mbps port and one 1000Mbps port, the maximum transfer rate between the 2 bridges is 1200Mbps. The maximum achievable maximum network speed is 750Mbps, in practical applications, the signal will be attenuated, and the actual network speed will be lower.
- Plug and play&Easy to Use: This outdoor point-to-point wireless bridge has been paired at the factory and can be directly connected to use. The long range wifi bridge support point-to-point, point-to-multipoint application. Point-to-point pairing can be done by dialing a code without entering the GUI, and it can be automatically paired when the power is restored after a power failure, which is very simple to use
- 5KM Wide Range: The outdoor wifi bridge point to point built-in a 16dBm directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km (barrier-free), and the actual application distance should be less than 5KM. Trees will not block the transmission speed of peer-to-peer internet wireless bridges, suitable for shops, warehouses or garages near your home
- Network Expansion & Surveillance Expansion: This point-to-point internet bridge easily helps you extend the network range to a second building (barn, shop, warehouse, garage), or wirelessly extend the IP camera surveillance range. WDS networking mode, video network dual compatibility. IP65-rated weatherproof enclosure for continuous operation in harsh outdoor environments, ideal for outdoor use
- Support POE power supply: support 24V POE power supply, easy to install and deploy, simplify construction. The ueevii wireless bridge performs in-depth protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission, smooth video surveillance, and in-depth optimization of the underlying wireless driver. It adopts 5.8G IEEE 802.11ac single-frequency wireless transmission technology, which has stronger anti-interference ability and stability.
UeeVii CPE850 WiFi bridge is widely used in warehouses, farms, and house lane monitoring systems. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission.
CPE850 is a 5Km 5.8G wireless transmission equipment. It uses wireless communication technology to transmit network data using air as a medium to carry out long-distance PtP or PtMP interconnection. The working data link layer realizes the interconnection and transmission of local area networks.
How to Access and Setting the Wireless Bridge CPE Through Computer Access:
Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
How to find and change CPE850 WiFi SSID and password?
1. Find the WiFi hotspot password of CPE850, path: Setting-->Wireless--> Name(SSID) and Password.
2. Enter the new SSID and password and save.
CPE830 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps.
1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability
Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.
Point-to-point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450
Product Description
UeeVii CPE830 is a long-distance 5.8G wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks. The transmission distance can reach up to 3km. CPE820 Video Bridge Transmission usually consists of two devices in AP and Client mode respectively. On the Client-side (Receiving side) CPE connects with IP Camera, at the AP side (Transmitting side) CPE connects with a video recorder. The AP can be receiving wireless data transmitted from multiple Clients, and it is easy and convenient for centralized management of the remote equipment. CPE is widely used in highways, reservoir river monitoring, elevator monitoring systems, site crane monitoring systems, port terminal monitoring systems, marine aquaculture monitoring systems, and so on. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.
Package Included:
2 * CPE830 Gigabit Bridge
2 * Gigabit POE Adapter (24V)
2 * Cat 5e Network Cable
2 * Metal Hoop
1 * User Manual
Wireless Bridge Application Case
We have a second building that is about 150' from our main building and needed stable internet for both employees and security systems. I tried reaching it with our mesh routers, but even placing one on an outside wall wouldn't supply a stable signal. We could have installed a second modem/router but that would add hundreds to our initial install and monthly costs. Installing this bridge has offered a stable signal and wiring it into a mesh system, it has allowed us to expand our net throughout the second building.
|
|
|
|
|
|---|---|---|---|
Helpful Indicator LightsChange the characters of the digital tube at the bottom of the wireless bridge to modify the pairing signal channel. The steady light state indicates that it is working, and the blinking state indicates that it is being set. The lights on the sideshow the power and LAN connection status, and the signal lights indicate the signal strength of the paired 2 bridges. |
Only One 1Gbps PostThe wireless bridge has 1 100Mbps and 1000Mbps RJ45 ports, both of which can accept a 24V PoE power supply, recommended to connect a gigabit port, and the CAT 5e network cable can be used as a power cable to supply power and transmit data. DC power supply is not recommended. The PoE adapter has a PoE port and a LAN port, and only the PoE port supplies power. |
Switch Master-slave BridgePoint wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing. |
Easy InstallationYou can fix the point-to-point bridge on the bracket (ASIN: B09NLLG8MZ) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the UeeVii Universal Bridge Bracket. |
|
|
|
|
|---|---|---|
Lane Monitoring ApplicationDisplay your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs. |
Elevator Monitoring ApplicationUsing a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse. |
Network Extension ApplicationExtend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money. |
Point to Multipoint Pairing Step:
This describes the setup of the Master bridge and 3 Slave bridges
1. Slide one unit’s A-B switch to A (Master Bridge) and the remaining 3 units to B (Slave Bridge);
2. Connect the PoE power supplies to each unit using the Ethernet cables as above ;
3. Plug in the power supplies to provide power to the CPE830s;
4. Wait for them to power up, about 2 minutes;
5. Click the reset button to select a channel with a letter. Included 1,2,3,..., A,B,C,...,F.
6. Then on the other 3 units do the same. All units need to be on the same channel;
7. Wait for 2-5 minutes to complete the pairing. When the number of the digital display is solid and the 4-grid signal light on the side turns on, it means their pairing is successful;
8. Finally connect other devices (Router, PC, Switch, etc.) and install them on the Slave units through the LAN port and verify connectivity.
More Application Scenarios
How to Access and Setting the Wireless Bridge CPE Through Computer Access:
- Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
- Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
- Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
- Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
- Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
- Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
Purchase Tips: The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. If the product is damaged or missing accessories, please let us know to reissue a new set. This CPE cannot directly expand the WiFi range for you. If you have any questions, you can free feel to let us know via Amazon or Email, we will quick response and help you solve your questions.
How to find and change CPE830 WiFi SSID and password?
1. Find the WiFi hotspot password of CPE830, path: Setting-->Wireless--> Name(SSID) and Password.
2. Enter the new SSID and password and save.
- UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.
- CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.
- Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.
- Point-to-point bridge easily helps you expand the network range to the second building(barn, shop, warehouses, garages), or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.
-
Support PoE power supply (50 meters) power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMA/CA, CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID: 2A6EJ-CPE450
-
Product Description
Wireless Bridge Application Case
We have a second building that is about 150' from our main building and needed stable internet for both employees and security systems. I tried reaching it with our mesh routers, but even placing one on an outside wall wouldn't supply a stable signal. We could have installed a second modem/router but that would add hundreds to our initial install and monthly costs. Installing this bridge has offered a stable signal and wiring it into a mesh system, it has allowed us to expand our net throughout the second building.
How to Access and Setting the Wireless Bridge CPE Through Computer Access:
- Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
- Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
- Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
- Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
- Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
- Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
Lane Monitoring Application
Display your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs.
Elevator Monitoring Application
Using a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse.
Network Extension Application
Extend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.
Helpful Indicator Lights
Change the characters of the digital tube at the bottom of the wireless bridge to modify the pairing signal channel. The steady light state indicates that it is working, and the blinking state indicates that it is being set. The lights on the sideshow the power and LAN connection status, and the signal lights indicate the signal strength of the paired 2 bridges.
Dual LAN/PoE Port
Wireless bridge has 2 100Mbps RJ45 ports, both of which can accept 24V PoE power supply, and the CAT 5e network cable can be used as a power cable to supply power and transmit data. DC power supply is not recommended. The PoE adapter has a PoE port and a LAN port, and only the PoE port supplies power.
Switch Master-slave Bridge
Point wireless bridge switches the master and slave bridges through the A-B button, A represents the master bridge, and B represents the slave bridge. In point-to-multipoint, take one of the bridges as A, and the other bridges as B, and then set them to the same pairing character to complete the point-to-multipoint pairing.
Easy Installation
You can fix the point-to-point bridge on the bracket (ASIN: B09NLLG8MZ) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the UeeVii Universal Bridge Bracket.
On 16/04/2024 at 19:21:33 AEST, seller added the following information: