PLEASE READ EVERYTHING !!!!!
DON'T BUY IF YOU ARE IMPATIENT AND HAVE TENDENCY OF LEAVING NEGATIVE FEEDBACK WITHOUT GIVING REASONABLE TIME FOR HELP/ RESPONSE ........
WE ARE NOT SELLING A RADIO,THE LISTING IS FOR FIXING YOUR OWN DEFECTIVE UNIT
WE ARE OFFERING SD CARD THAT ONCE INSTALLED WILL FIX YOUR UNIT. THE SD CARD HAS THE ORIGINAL AVH-4500NEX SOFTWARE.
AVOID OTHERS BEING SOLD,THEY ARE HACKED AVH-W4400NEX THAT DON'T HAVE SOME FEATURES WORKING LIKE HDMI,WebLink AND OTHERS.
IF YOU HAVE A
PIONEER AVH-W4500NEX
THAT KEEPS ON DISPLAYING SOFTWARE ERROR ON THE SCREEN JUST LIKE THE PICTURES SHOW WE CAN HELP YOU REPAIR THE UNIT.
ALSO THE SD CARD FIXES ISSUES RELATED TO CONSTANT BOOT LOOP,DISTORTED SCREEN OR BLACK SCREEN AFTER BOOTING.
AFTER YOU BUY THIS AUCTION WE WILL SEND YOU SD CARD THAT HAS THE OPERATING SOFTWARE.
YOU WILL NEED TO KNOW HOW TO INSTALL THE SD CARD IN YOUR UNIT OR SEEK PROFESSIONAL HELP.
THE SD CARD REPLACES THE STOCK SD CARD THAT ALREADY EXISTS IN YOUR UNIT,THE WHOLE SCREEN AND THE SURROUNDING BLACK BEZEL MUST BE REMOVED TO GAIN ACCESS TO THE SD CARD LOCATION.
THE FRONT PART THAT HAS LCD SCREEN AS WELL AS THE SURROUNDING BLACK BEZEL MUST BE REMOVED IN ORDER TO GET TO WHERE SD CARD IS LOCATED.
INSTALLATION INSTRUCTION
1.TURN THE RADIO UPSIDE DOWN,USE A FLAT SCREW DRIVER ON THE EDGE OF THE SCREEN WHERE MOTORIZATION MECHANISM IS TO NUDGE THE SCREEN OUTWARD AND THEN PUSH IT DOWN USING YOUR HANDS.
2.REMOVE THE 2 SCREWS THAT CONNECT THE SCREEN TO THE MOTORIZATION MECHANISM.
3.DISCONNECT THE SCREEN RIBBON FROM THE SCREEN,BE CAREFUL NOT TO TEAR THE RIBBON OR DISLODGE THE PART THAT HOLDS THE RIBBON FIRMLY.
4.REMOVE THE 2 SCREWS THAT ARE ON THE SIDE OF THE BLACK SURROUNDING BEZEL.
5. USING A SMALL FLAT SCREW DRIVER,GENTLY REMOVE THE BLACK BEZEL (CHECK THE LAST PICTURE)
6.THE SD CARD IS ON THE LEFT SIDE THAT IS BLUE,REMOVE IT AND INSTALL THE NEW ONE.
7 PUT THE UNIT BACK TOGETHER IN REVERSE OF THE INSTRUCTIONS.
PLEASE LET US KNOW IF YOU HAVE ANY QUESTIONS AND WE WILL BE HAPPY TO ANSWER THEM THE BEST WE CAN.
VERY VERY IMPORTANT!!
IN ORDER FOR WIRELESS ANDROID AUTO TO WORK;
1. YOUR UNIT MUST BE RESTORED TO FACTORY DEFAULT SETTINGS IN System/Restore Settings/All Settings.
After the unit reboots,choose Network Mode then press OK
2. DELETE THE UNIT FROM YOUR PHONE BLUETOOTH PAIRING
3.MAKE A FRESH BLUETOOTH PAIRING WITH YOUR UNIT.
4.FINALLY PRESS THE BOTTOM LEFT AREA THAT HAS PHONE ICON AND THEN CHOOSE YOUR PAIRED PHONE.