Thank you for your interest in our tools.
You buy from the dealer without risk and receive an invoice with VAT shown.
If, despite our careful inspection, something is wrong with the goods, please contact us. There is always a solution.
We offer you the following immediately available professional accessories:
White silicone-containing special paste Äronix 6900 type STT
Lubricants, sealants and release agents,
Insulating paste
-Lubricates and seals excellently when pairing plastic/metal
Plastic/Plastic
-Characterized by a low coefficient of friction
-Is very well resistant to water, steam, many chemicals,
vegetable oils, diluted acids and alkalis
-water repellent
-Does not resinify and is extremely resistant to aging
-Very good non-stick properties
-Is physiologically harmless
-Complies with FDA 178.3540 + 177.1550 regulations
US Food and Drug Administration
-Ice is also easier to dissolve
DETAILS:
- Protective function due to moisture-repellent properties. Good lubricating effect under humid operating conditions.
-
The stick-slip movement is eliminated, which is due to the fact that the static and sliding friction coefficients of the PTFE are the same.-
Very good sliding properties at low pressures.-
No drying out, hardening or bleeding.-
Dielectric properties in electronics.-
PTFE paste “Type STT” is age-resistant and has a Vaseline-like consistency.-
The flash point is over +300°C.-
PTFE paste “Type STT” has excellent sealing and sliding properties on plastic pairings.-
Water-repellent and anti-corrosion.-
Ice can also be removed more easily.Areas of application:
-
Plastic profile systems, heating and sanitary systems, hoses, seals, fittings, plastic slideways, closures, plastic screw connections, drawer guides, roller shutter guides, plastic ball bearings, switching devices, camping and caravan accessories, air pumps, etc.-
Excellent lubricating effect for plastic/metal and plastic/plastic (rubber) pairings.-
Light and soft movements are achieved by adding concentrated PTFE powder particles.-
The so-called stick sliding is almost eliminated.-
It has a water-repellent effect, prevents leakage currents, protects rubber seals and makes them slippery.-
Used for laboratories, medical technology and cosmetics because of its temperature and oxidation resistance.Application:
-
Apply and spread using a brush or spatula.-
PTFE paste “Type STT” does not cause skin irritation and is non-toxic even if accidentally ingested.Tech. Data:
Type of soap: silicone oils and inorganic thickeners
and PTFE as a solid lubricant
Form: pasty
Color white
Dropping point: none
Temperature determination : -40°C to +200°C
Flash point: +300°C
Safety: free from lead compounds, sulfate,
Chlorides and fluorides
Labelling:
GefStoffV: not subject to labeling
GGVE/GGVS/RID/ADR: ditto.
GGVSee/IMDG code: ditto.
The product must not enter the water system.
Classification of water-polluting substances WGK 1
Not dangerous goods in the sense of the transport regulations
PTFE=Teflon* (registered trademark of DuPont)
Resistance list (housing/sealing materials):
PPC+
PP = Polypropylene +
PFA+
PA = polyamide, trogamid +
PE = polyethylene +
RG5 = gunmetal +
MS = brass +
GG 25 = gray cast iron +
EPDM --
FPM = Viton +
PTFE = Teflon +
CSM = Hypalon --
NR = natural rubber --
CR = Neoprene +
NBR = Perbunan +
Not dangerous goods in terms of transport regulations!
This information corresponds to our current knowledge.
They do not exempt the processor from carrying out his own checks.
A legally binding assurance of certain characteristics
or suitability for a specific purpose cannot be determined from our information
be derived. Possibly. existing legal provisions and regulations,
the handling and use of the products
must be taken into account by the recipient of our products.