500g can under article number 132764385151!
Thank you for your interest in our tools.
You buy from the dealer without risk and receive an invoice with VAT shown.
If, despite our careful inspection, something is wrong with the goods, please contact us. There is always a solution.
We offer you the following immediately available professional accessories:
Äronix gear fluid grease 100ml
Sodium soap grease
NLGI Class 0
-20°C - +100°C
Professional quality
You will receive a can with 100ml content.
You can find further container sizes in the shop under “lubricating greases”
Application
Äronix gear fluid grease is used in non-oil-tight closed mechanical gears
e.g.: machine tools with slower running gears such as Drills, drilling and chiseling hammers from Bosch, Hilti, Dewalt, Makita etc.
(We also have a calcium grease for faster-running gears in the shop, as well as a special gear oil)
The grease is also ideal for lubricating the electro-pneumatic Impact mechanisms from the hammer drill!
So hammer barrel, piston, striker, firing pin etc.
Item description
• Sodium soap grease
• EP-additized
• not water resistant
• Marking according to din 51 826: GP 0 F-20
• Marking according to ISO/DIS 6743-9: ISO-L-XBBBB 0 1 / 2
Technical information
Color/Appearance: Braun
Thickener: sodium soap
Temperature range: -20°C - +100°C
NLGI class / din 51 818: 0
Base oil viscosity/40°C / din 51 562: 220 mm²/s
Water content / din 51 777/T1: < 0.1%
Dropping point / din ISO 2176: > 140 °C
Full penetration/0.1mm, 60 double strokes / din ISO 2137: 370
Full penetration/0.1mm, 60,000 double strokes / din ISO 2137: 420
Water resistance / din 51 807/T1: Rating level 3
Oil separation 18h/40°C / din 51 817: 1.5%
Corrosion protection behavior (EMCOR test) / din 51 802: 0/0
Oxidation resistance 100°C/100h / din 51 808: 0.3 bar
VKA welding force / din 51 350/T4: 2400 N
Not dangerous goods in the sense of the transport regulations
This information corresponds to our current knowledge.
They do not exempt the processor from carrying out his own checks.
A legally binding assurance of certain characteristics
or suitability for a specific purpose cannot be determined from our information
be derived. Possibly. existing legal provisions and regulations,
the handling and use of the products
must be taken into account by the recipient of our products.