USB 4Achse CNC 3040 Graviermaschine Router Fräsmaschine Graveur 800W

Attention：

This is electronic one ,once you purchase it,we will send  to your email address at once

Notes:Please prepare a computer with USB Interface.

Packing list:

1X main unit (Frame)

1X main unit (working base)

2X Fence baffle

1X control box

1X A axis

1X Sinal cable for A axis

1X USB line

2X cutter 2*6mm

2X cutter 3*6mm

10X 4*7mm round head

6X 4*10mm black Inner six angle screw with nut

8X 5*20mm black Inner six angle screw

4X 5*8mm Flat Philip's head screw with nut and gasket

8X 6*11mm BALCK FLAT Inner six angle screw

12X Aluminium fastener

1X 13-15# Wrench

1X 14-17# Wrench

2X six angle Wrench(3mm)

2X six angle Wrench(4mm)

1X Teflon tape

2X Fuse (5A)

1X Power cable

CNC ENGRAVING MACHINE parameters:

X,Y,Z Working Area:400(Y)*295（X）*80(Z)mm

Outside dimension:630*505*495mm（L*W*H）

Table size:550（Y）*360（X）mm

Lathe structure:6061/6063 Aluminium alloy

Max. Feeding height:≤60mm

Drive unit：

X axis SFU01204-4 Ball Screws

Y axis SFU01204-4 Ball Screws

Z axis SFU01204-4 Ball Screws

Sliding unit;

X axis High intensity Chromeplate shaft

Y axis High intensity Chromeplate shaft

Z axis High intensity Chromeplate shaft

Stepping motor:57 two-phase 3A 150N.cm

Spindle motor（tips：1,The spindle motor must connect with the VFD.

2,It cannot directly connect with the supply voltage (220V).3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.

Outside dimension:65*158mm

Material:304 stainless steel，Copper coil，Pressure cast aluminum pipe water jacket

VOLTS，current，power:AC220V~240V/50Hz，5A,0.8KW VFD

Spindle speed:24000 rpm

Max working frequency:400Hz

Principal axis collet:ER11collet，Standard configuration :6mm

Nut Model:ER11-A

Cooling:Water-cooling

Speed mode:By adjusting the VFD output voltage and operating frequency

from 0-24000RPM

Lubrication way:lubricated by high grease

Repeat accuracy:0.05mm

Spindle precision:radial beat acuities 0.03mm

Carving Instructions:G code / TAB files / nc file / NCC files

Communication interface:through USB connection with computer

Maximum Idle speed:1500mm/min

Working Speed :50-1500mm / min (different material with different speed settings)

Control box parameters:

Operating Voltage:AC220V~240V

Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive

Computer connection:USB port

Command code:G code

Protection:Emergency stop button

Description:

1.This CNC 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation,Teaching, Student Project and Hobby Purposes.

2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic,MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.

3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,PVC foaming board, indentation plates, signs, construction models, instrument panels,wooden products, etc.

4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...

5.With the assist of the CNC ROUTER 3040T, your design idea will be real-time display.

Feature:

1,The NEW 0.8KW water- cooled VFD is available operating for long time,which can reinforced the processing ability of the machine

and can be used to process aluminum alloy and hard wood.

2,water cooling spindle works more stable and durable.

3, High quality accurate ball Screws drive make the engraving more precision.Anti- blackflash,high precision,long life circle.

How to use

1.Assembling and locating the CNC machine on steady desk well.

2.Make sure that your computer has a 25pin USB port output.

3. Place the control box in a ventilated dry place where there is no dust,no moisture

4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.

5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will

damage the driver of the controller.

6.Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.