12V Multifunctional Battery Testers Auto Repair Industry Detection
Product features: 1. Small to carry 2. High sensitivity, fast reaction speed, simple and convenient operation 3.
Widely used in auto repair industry: especially suitable for
automobile, electric vehicle repair technicians and family, enterprise
vehicle maintenance and repair 4. It has the function of REVERSE
connection alarm and overvoltage protection. The red clip is connected
to the positive pole "+" the black clip is connected to the negative
pole "-" if the red clip is connected to the negative pole, the LED
display will not display 5. With LED display screen backlight is
clear, the test display screen, at night or in the dark can also see the
measured value auxiliary measurement work, easy reading 6. After the
correct connection, the LED display will display the real-time voltage
of the measured voltage and the LED light will be on to indicate the
battery status 7. Test the state of the generator charging system:
During the test, please keep the tester correctly connected to the
battery terminal, and then start the generator. At this time, the output
voltage will be displayed on the LED screen, and the LED indicator on
the right side will be on to indicate the state of the generator 8. No battery installation, easy to complete a number of tests, using real shot measurement
Product parameters: Product model: AT619 Product model :BT-171 Test voltage :12V Test mode: positive and negative pole test clip Product material :ABS insulation material LED lights: red/yellow/green/blue/white lights Product weight :78g
Related instructions for LED lights: FULL- Full: The LED is on and the battery is in normal state MEDIUM- medium power: The LED light is on, and the battery voltage is slightly low and needs to be charged Low-low power :LED lights on, battery power is insufficient to charge, buzzer alarm EMPTY- No power: The LED light is on, the battery is completely out of power and needs to be charged HIGH- High voltage: The LED light is on and the output voltage of the alternator is high GOOD- Good voltage: The LED light is on and the alternator output is normal DEAD-
failure: The LED light is on, the battery voltage is too low, and the
buzzer alarm indicates that there should be a problem with the battery.
At this time, the battery should be checked by a professional engineer
to see whether to replace it RECERSE- Reverse connection of positive
and negative electrodes :LED light on, battery tester and battery
terminal are connected in reverse, buzzer alarm prompt
Packing and list: Carton packing Battery detector *1+ Instruction *1