NEW DESIGN:Saker soldering iron kit the design of the side can always observe the internal operation,it is also convenient to replace the heating core in the future,stainless steel casing,anti-corrosion and more durable.
INTEGRATED POWER SWITCH:Saker soldering has an integrated power switch,which is more energy-saving,safe to operate and use,and does not need to be plugged and unplugged frequently every time.
EASY TO USE:When using the handheld soldering kit for the first time,it must warm up for a few minutes,it is normal to have smoke and it will disappear after a few dozen seconds. Straighten the rated tin wire, press the tin inlet, insert it from the inlet until it touches the tip of the soldering iron,stop threading until the wire is delivered to the mouth of the tin guide,then pull the trigger and it will work properly.
ONE-HANDED OPERATION:Smart saker soldering iron kit feeds the welding wire through a stepper motor,allowing you to solder effortlessly with one hand Without feeding solder with the other hand,When it is necessary to withdraw or replace the tin wire when it is stopped,just push the plate direction upwards and take out the tin wire at the same time.
SAFETY DESIGN:Smartsaker soldering gun uses an anti-bend tail wire to prevent the wire from bending during use,which can effectively improve the service life.Self reset ratchet trigger buckle has self reset function and good ratchet forward feeling.
WIDE USED:Saker soldering iron widely used for welding circuit board,appliance repair,jewelry and metal headdress making,computer,and DIY.Very suitable for beginners,welders,basic household equipment,welding engineer training,etc.

Product Description

Saker Soldering Iron Kit 60W Welding Tools ,Working Voltage110V

Our electric soldering iron combination tool adopts a new tin feeding design, which is scientific in design and simple in operation

One-Hand Operation,Welding a Good Helper

1. The soldering gun is designed with a lightweight mechanism, making it easier to work.

2. High quality heating element, with longer working life.

3. The soldering iron head and heating core are easy to replace, operate and complete the welding operation.

4. The rated diameter of tin wire is 0.8~1.2mm.

5. The newly developed products have solved the trouble of changing tools for welding at different temperatures and the waste of working time, so as to better improve the working efficiency.

Saker Soldering Iron Ki

1*Solder Gun ,1*50g Tin Wire ,1* Suction Torch ,2*Anti-Static Sharp Nose Tweezers

How to Use Solder Sucker

1、Heat up solder to be removed until melted.

2、Press plunger down until a clicked sound.

3、Place the sucker next to the soldering tip and press the release button.

4、Repeat it if you need.

Performance Characteristics of Our Electric Soldering Iron

Detachable Side Door Design

The design of the side can always observe the internal operation, quick and easy to replace the heating core.

Easy to Install Tin Wire

Just pass the tin wire through the tin inlet to complete it. Suitable for tin coils with an inner diameter of 2cm and an outer diameter of 6.2cm.

Self-Resetting Trigger Buckle

This trigger buckle has a self-resetting function and a good sense of ratchet progression.

Easy to clean

Suction torch remove waste tin residue soldering iron solder desoldering aids,Curved-nose tweezers, pointed-nose tweezers grip component pins.

Matters Needing Attention

When working,the temperature of the soldering iron tip and the soldering iron tube is higher than 400 degrees.It is strictly forbidden to touch the tip and tube to avoid burns.After the work is completed,turn off the power supply and wait until it is completely cooled.

Use Scenarios of Electric Soldering Iron