Vortice 61022 Nordik 160 HD Base Commercial Ceiling Fan Manufactured by: Vortice, Italy Simply resistant to dirt, dust and water The Nordik Heavy Duty Base 160 Ceiling Fan is a ceiling fan for commercial and industrial use. It has IP55 protection that makes it resistant to dust, water and dirt in work environments such as barns, metallurgical plants or chicken coops. The motor comes balanced and has a class H insulation level. Its diameter of 152.4 cm, with a speed of 186 to 233 RPM, creates an air flow of 19,300 m3/h. Its power is 85 W. It has 3 anthracite gray blades made of metal. These ceiling fans have a coverage of approximately 26 m2. installed at a height of 2.4 m - 2.8 m (for higher ceilings there are special extension bars). It can be included from a wall panel to a TDA-Controler system for the chain drive of various equipment in large warehouses or factories. The number of speeds of the industrial ceiling fan vary depending on the drive. Due to its manufacture, the industrial ceiling fan can be used in high temperature conditions up to 50 ºC. The motor body is made of die-cast aluminum, the blades are made of steel with zinc electrolytic coating, treated with an epoxy base coat and an anthracite epoxy top coat with a hammered finish. Ceiling fan for commercial use VorticeCeiling fan for industries, livestock and agriculture with IP55 Norkid Heavy Duty: Perfect for use in industrial and commercial facilities, agriculture, outdoors and work spaces with high humidity characteristics such as greenhouses or even environments with high pressures of water. Vortice commercial fans are certified according to Directive 2006/42/EC, part 1 on machinery for commercial use.