Specifications:
1. Condition：100% Brand New
2. Color：As shown in the figure
3. Number：1687，CU1678

4. Brand：KAC

5. Warranty：Lifetime 

 

 

Description

General Information:

Lifetime Warranty

Top U.S Seller

60 days free return period

No restocking fees

All products are quality inspected & 100% leak tested

Drop in - direct fit for easy installation

OE specification

Highest grade plastic, aluminum used in our manufacturing process

 

PART NUMBER

 1687, 2006, 20782, 2219004, 431404, 52463624, 52468360, 52470119, 52470924, 52470925, 52470926, 52471111, 52471112, 52477185, 52477186, 8011687, 93426178, 93426180, 9639, CU1687

 

 Cars applications:

1995-2002 For chevrolet Cavalier 2.2L
1995 For chevrolet Cavalier 2.3L
1995-2002 For chevrolet Cavalier 2.4L
1995 Pontiac Sunfire 2.3L
1995-1996, 1998-2002 Pontiac Sunfire 2.2L
1996, 1998-2002 Pontiac Sunfire 2.4L

 

Advantage:

-OE design to ensure exact fit, form and function for an easy drop-in installation;

-Built with high density multi-lowered fins for maximum cooling efficiency;

-Direct Replacement;

-Improve Cooling Efficiency;

-100% Leak Tested;

-Plastic tanks with aluminum core;

-Built to strict quality control standards;

 

 

How to clean radiator:

1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.

2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.

 

How to replace the radiator:

1. Disconnect the battery.

2. Drain the radiator fluid into a suitable container.

3. Remove the old radiator:

 -Take off any plastic covers around the radiator.

 -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

 -Disconnect the radiator hoses from the radiator.

 -Disconnect the transmission cooling lines from the bottom of the radiator.

 -Remove any clamps, brackets, or screws holding the radiator inside its frame.

 -Lift the radiator up and out of the car.

4. Install the new radiator:

 -Slide the new radiator into place.

 -Connect any clamps or brackets that hold the radiator in place.

 -Connect the transmission cooling lines carefully.

 -Connect the engine cooling hoses to the radiator.

 -Replace the fan and fan shroud.

 -Reconnect the fan electrical connection.

 -Replace the plastic covers.

5. Fill the radiator with fluid.

6. Check your work to make sure that there are no leaks.

(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note: Do please keep children and pets away when replacing the radiator)

 

 

Note:

1.It will be better if you can check with the above chart to make sure if this radiator will fit your vehicle.
2. The radiator cap that has not passed the test can't release the pressure when it reaches the pressure value.
3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
4. The radiator fan does not turn, resulting in high temperature in the water tank.
5. After loading the product on your vehicle  and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.
6. Before you start up your vehicle, please make sure there is coolant in the radiator. 

 

 

FEATURES:

1. The Core was made from high quality Aluminum.  Effective Heat Dissipation.

2. Good sealing.  All of the new radiators will be inspected before selling (including 100% leaking test).

3. Direct Replacement, easy to be installed.  

4. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem. 

 

 

Item Description:
100% Brand New in Box With Customized Packaging, Never Been Installed Before
 OE Design For Direct Fit, Form And Function For An Simple And Fast Installation
 Built With High Density Multi-Lowered Fins For Maximum Cooling Efficiency
 Gasket And O-Rings Are Thermal Shocked To Ensure Durability in Extreme Cold Weather
 Every Radiator is Subjected To An Aging and Endurance Test in Order To Validate its Performance Under Extreme Weather Conditions
 Engineered To Stringent Tolerances Designed By Manufacturer's in House Engineering Team To Ensure Perfect Performance
 No Other Hardware or Accessories Included With Radiator, No Radiator Cap Too, Please Apply Original One if That is Still in Prefect Condition
 No Installation Guide or Instruction Included, Professional Installation is Highly Recommended

Package includes
1x Radiator
(As shown in the picture)

Note:
★eBay compatible list can not show up all car model, and sometimes it may have mistake, and may not 100% accurate or out of date.
★Please check the manul of your vechicle and choose the correct Good.
★If you are not sure the which socket your vehicle need.
★Please send us your car make, model, year and other information,we will help to check which you need.
★If you have any questions, please do contact us.Thank you!