Introduction
MXR-SLC based on MXR-SNA coilovers, which is also height adjustable. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
 

Application 
For Porsche Cayenne 2002-2010 (955 & 957 body)

 

Specification
Top mount: Pillow ball front and rear 
Type: Lowering Kit
Damping: 24 levels rebound damping adjustable
Spring rate Front: 20 kg/mm (1120 lbs/in)
Spring rate Rear: 8 kg/mm (448 lbs/in)
Spring length Front: 180mm
Spring length Rear: 180mm
Adjustable height: lowering 1-3inch 
Coilover overall length Front: 600mm-700mm
Coilover overall length Rear: 490mm-550mm
Shock type: Twin tube
Spring Preload: 7-10 mm
Color: Gold body with black spring

Package included
Complete coilover assembly kit for front and rear
A pair wrench for height adjustment

Dimension
Weight: 28820.00 g
Size: 70.0cm x 50.0cm x 19.0cm 

Feature
1. Lowered height adjustment from 1" - 3" (depends on vehicle models) which allow lower center of gravity and also add a more aggressive stance 
2. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)
5. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring---  600,000 times continuously test to assure it's high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper more well and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Suggestion
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

Notice
- Hi-performance aftermarket parts; no instruction included; professional installation is suggested.
- Please check our store for other auto parts you may be interested in.