1. Condition：100% Brand New 2. Color：As shown in the figure 3. Part Number：CU1193 41-1193A 1193 4. Brand：KAC 5. Warranty：Lifetime
Description
General Information:
Lifetime Warranty
Top U.S Seller
60 days free return period
No restocking fees
All products are quality inspected & 100% leak tested
Drop in - direct fit for easy installation
OE specification
Highest grade plastic, aluminum used in our manufacturing process
Fitment:
Make
Model
Year
Notes
Position
Jeep
Cherokee
1991 - 1993
4.0L | Except Post Office Vehicle | Left Hand Drive
N/A
Jeep
Cherokee
1994 - 1997
4.0L | Left Hand Drive
N/A
Jeep
Cherokee
1998 - 2001
Left Hand Drive
N/A
Jeep
Comanche
1991 - 1992
4.0L | Except Post Office Vehicle | Left Hand Drive
N/A
Advantage:
-OE design to ensure exact fit, form and function for an easy drop-in installation;
-Built with high density multi-lowered fins for maximum cooling efficiency;
-Direct Replacement;
-Improve Cooling Efficiency;
-100% Leak Tested;
-Plastic tanks with aluminum core;
-Built to strict quality control standards;
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1.It will be better if you can check with the above chart to make sure if this radiator will fit your vehicle. 2. The radiator cap that has not passed the test can't release the pressure when it reaches the pressure value. 3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure. 4. The radiator fan does not turn, resulting in high temperature in the water tank. 5. After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product. 6. Before you start up your vehicle, please make sure there is coolant in the radiator.
FEATURES:
1. The Core was made from high quality Aluminum. Effective Heat Dissipation.
2. Good sealing. All of the new radiators will be inspected before selling (including 100% leaking test).
3. Direct Replacement, easy to be installed.
4. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem.
Item Description: 100% Brand New in Box With Customized Packaging, Never Been Installed Before OE Design For Direct Fit, Form And Function For An Simple And Fast Installation Built With High Density Multi-Lowered Fins For Maximum Cooling Efficiency Gasket And O-Rings Are Thermal Shocked To Ensure Durability in Extreme Cold Weather Every Radiator is Subjected To An Aging and Endurance Test in Order To Validate its Performance Under Extreme Weather Conditions Engineered To Stringent Tolerances Designed By Manufacturer's in House Engineering Team To Ensure Perfect Performance No Other Hardware or Accessories Included With Radiator, No Radiator Cap Too, Please Apply Original One if That is Still in Prefect Condition No Installation Guide or Instruction Included, Professional Installation is Highly Recommended
Package includes 1x Radiator (As shown in the picture)
Note: ★eBay compatible list can not show up all car model, and sometimes it may have mistake, and may not 100% accurate or out of date. ★Please check the manul of your vechicle and choose the correct Good. ★If you are not sure the which socket your vehicle need. ★Please send us your car make, model, year and other information,we will help to check which you need. ★If you have any questions, please do contact us.Thank you!
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Fitment
Verify this part fits your vehicle using the compatibility chart
UPC
997750800519
Features 1
DURABLE & BRAND NEW
Features 2
US WAREHOUSE
Features 3
FAST & FREE SHIPPING
Features 4
LIFETIME WARRANTY
MPN
SS800519
Payment
PayPal only!
1.We only accept Paypal.
2.We send all the items are based on your paypal address.
3.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
Shipping
We only ship this item to United States !
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
5. We are located in areas such as NJ, CA, TX, etc.
Returns
If you send email to us,In our working hours will be resumed within 48 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
* (1)Not receive in time;
* (2)Item broken;
* (3)Not satisfied with the item...
Contact Us
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please!
❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!
✅(YES) Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!
Step 3: Describe your question clearly; we will give you the best solution
Five-Star
Please leave five stars positive feedback positive comment and Five-Stars.
* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!
* Feedback is very important to us.
* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.
* If we don't understand these problems, we won't be able to solve them!
* After understanding the problem, we will be able to give you a satisfactory answer!
It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!
Your comment is very important in our business success
Starter for Chevy Prizm Toyota Corolla 1.8L 1998 1999 2000 2001 2002 17727
Introductions Looking to replace your starter motor? Then get the right one you want here at our website! Our Starter Motor offers an affordable solution for your restoration needs. It is designed to meet original specifications to fit, form and function. The starter is durably constructed with premium quality components and lubricated with grease for maximum performance. And it has been rigorously inspected to perform up to safety standards. With perfect fit, quality and price, what are you waiting for? Click and order right now!
Features 1. An affordable solution for your restoration needs 2. Designed to meet original specifications to fit, form and function 3. Durably constructed with premium quality components for maximum performance 4. Rigorously inspected to perform up to safety standards 5. Perfect fit, quality and price
Description
Quality Guaranteed
All of our starters are tested to ensure product performance and durability
Part Type: Starter
Teeth: 9
KW: 1.4
Voltage: 12
Rotation: CW
Note: OSGR
Part Number
AC DELCO: 336-1669
ARROWHEAD: SND0127
CARGO: 113243
DENSO: 228000-6660, 228000-6662, 228000-6663
For general motors: 94857220
J & N: 410-52090
LESTER: 17727
REMY REMAN: SR107106
For toyota: 28100-0D020
WAI: 2-1892-ND
Compatibility
MAKE
TYPE
MODEL
YEAR
ENGINE
For chevrolet
Auto and Light Truck
PRIZM
1998
1.8L(110) L4
For chevrolet
Auto and Light Truck
PRIZM
1999
1.8L(110) L4
For chevrolet
Auto and Light Truck
PRIZM
2000
1.8L(110) L4
For chevrolet
Auto and Light Truck
PRIZM
2001
1.8L(110) L4
For chevrolet
Auto and Light Truck
PRIZM
2002
1.8L(110) L4
For toyota
Auto and Light Truck
COROLLA
1998
1.8L
For toyota
Auto and Light Truck
COROLLA
1999
1.8L
For toyota
Auto and Light Truck
COROLLA
2000
1.8L
For toyota
Auto and Light Truck
COROLLA
2001
1.8L
For toyota
Auto and Light Truck
COROLLA
2002
1.8L
Package Includes
1 x Starter
Important Points ➡️before Placing an Order, Be Sure to Check the Compatibility and Confirm That This Part Is Suitable for Your Vehicle. ➡️ to Confirm, Please Select a Vehicle from the "My Garage" List or Enter Your Vehicle Details Above to Ensure That Your Model Is Included in the Compatibility Table. ➡️ if You Encounter the Problem That You Can't Confirm Whether the Model Is Suitable, Please Contact Me. I Can Quickly Answer the Adaptability Problem for You. Thank You for Your Cooperation and Support!
Note ✅ Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date. ✅ Please Check the Manul of Your Vechicle and Choose the Correct Good. ✅ If You Are Not Sure the Which Socket Your Vehicle Need. ✅ Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need. ✅ If You Have Any Questions, Please Do Contact Us.thank You!
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter: There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery. You will not need to remove the positive cable on the battery. Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be. Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter. The smaller cylinder attached to the starter is the starter solenoid. A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid. In some cases, it may just be clips you need to disconnect for the wiring. On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter. Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one. Slide the starter into place. If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle. New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts. If the bolt does not thread properly, unscrew it and try again. Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid. With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery. With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle. If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it. As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. A weak connection from the battery can prevent the engine from starting. Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad. If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery. If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out? You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this? A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to? He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like? In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter? No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
Brand
KAC
Part Number
For Chevy Prizm Toyota Corolla 1.8L 1998-2002 17727
2.We send all the items are based on your paypal address.
3.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
We only ship this item to United States !
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
5. We are located in areas such as NJ, CA, TX, etc.
If you send email to us,In our working hours will be resumed within 48 hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
* (1)Not receive in time;
* (2)Item broken;
* (3)Not satisfied with the item...
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please!
❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!
✅(YES) Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!
Step 3: Describe your question clearly; we will give you the best solution
Please leave five stars positive feedback positive comment and Five-Stars.
* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!
* Feedback is very important to us.
* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.
* If we don't understand these problems, we won't be able to solve them!
* After understanding the problem, we will be able to give you a satisfactory answer!
It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!
Your comment is very important in our business success
On May 22, 2023 at 09:19:10 PDT, seller added the following information:
100% Brand New in Box With Customized Packaging, Never Been Installed Before
