Painted Black V Type Rear Spoiler Fits for BMW 6er Gran Coupé (F06) 640i 650

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Spoiler for BMW F06 6 Series Gran Coupé glossy BLACK Spoiler Type V

Item description

1 x ABS spoiler / rear lip - glossy black painted (saphire metallic 475) for BMW F06 6 Series Gran Coupé

With our professionally processed spoilers, which are painted three times after priming, you will not only save yourself a lot of nerves, but also a trip to the painter and additional costs for painting, as you can get the finished painted spoilers from us at a price that is barely higher than what you would otherwise pay for them would pay for paint.

The rear spoiler refines the vehicle with a dynamic finish - subtle and effective. The aerodynamic efficiency and directional stability increase at higher speeds. On the one hand, the rear spoiler emphasizes the dynamic elegance and, on the other hand, emphasizes the sporty look of the car in an individual way. By changing the aerodynamic characteristics, a sporty driving feeling is conveyed. The rear spoiler is stylistically and functionally precisely adapted to the vehicle design and can be installed directly.

- Made of high quality ABS material - hard thermoplastics
- perfect fit and workmanship
- easy assembly, no drilling work
- including high-quality body adhesive tape
- car wash safe

The spoiler comes with a special adhesive strip so that it can be installed without drilling - simple and stable. Quick and easy installation using adhesive tape, can withstand any car wash (48 hours). after assembly).

Best material quality (ABS) and a careful paint finish make the difference! The spoiler is made of ABS material, which is characterized by high strength values, good durability, high hardness and good scratch resistance. An ideal material for cars.

The properties of ABS at a glance:
- high surface hardness
- good impact resistance
- scratch-resistant surface
- good resistance to aqueous chemicals (not resistant to solvents)
- can be glued with methyl ethyl ketone (MEK).
- easy to edit with normal tools
- low weight

ABS, ACRYLNITRIL BUTADIENE STYRENE, these are amorphous thermoplastics.

Installation - Assembly / What you should pay attention to:
1. Before you attach the spoiler, please make sure that the surface of the trunk is clean, free of grease and dry
2. Place the spoiler and mark with masking tape where the outer edges are
3. Stick the M3 adhesive tape on the spoiler or Peel off the protective film and then stick the spoiler on the trunk


Please do not use a cutter/knife or similar to unpack the items. This puts you at risk of damaging the goods!
Buy it now Watch article Ask a Question

NOW: TÜV Nord material certificate for all FLY DESIGN spoilers made of ABS material.

  • The TÜV Nord material report confirms that the ABS material of our spoiler has been tested and meets the requirements of applicable regulations. The material has been thoroughly checked for defects or potentially hazardous materials.
  • The test was carried out by: TÜV NORD Mobility GmbH & Co. KG, IFM - Institute for Vehicle Technology and Mobility, Schönscheidtstr. 28, 45307 Essen | IFM - Office, Am TÜV 1, 30519 Hanover
  • The test report was created on March 2nd, 2022. The various tests were carried out based on din 52306.
  • The test covered the following areas: splinter resistance, flammability, edge and surface flames.

Uncomplicated, fast and safe!

Have you found the right product? Then you can order immediately! Uncomplicated, quick and secure in just a few steps.
  • 1. You choose the right product on Ebay.
  • 2. The entire purchase process takes place exclusively via Ebay. There are two payment options available to you: PayPal and advance payment/bank transfer.
  • 3. All paid orders received by us by 2 p.m. will be shipped the same day.
  • 4. You will usually have your product in your hands on the next working day. Delays depending on shipping service providers cannot be ruled out here.

Key Features

ABS spoilers Our ABS spoilers are made from a very stable and solid material. The advantage of the spoiler is clearly the accuracy of the fit and the quality. No further adjustment work is required here. You will receive the spoiler delivered and can install it directly.
PU spoiler Our PU spoilers are made from a flexible material. The spoilers are delivered straight and must be adjusted to the shape of the rear. This is done by heating it (e.g. on a heater or with a heat gun) and bending it to the desired shape.
duct tape Please do not forget to heat the 3M adhesive strips before installation. This guarantees that the spoiler will not come off.
.
Receive offers conveniently via email
Subscribe to Newsletter
Left
payment

Paypal
Transfer
Credit card

Shipment

Contact

Do you have any questions about our offers? Contact us using the eBay contact form.

eBay message
With our professionally processed spoilers, which are painted three times after priming, you will not only save yourself a lot of nerves, but also a trip to the painter and additional costs for painting, as you can get the finished painted spoilers from us at a price that is barely higher than what you would otherwise pay for them would pay for paint. The rear spoiler refines the vehicle with a dynamic finish - subtle and effective. The aerodynamic efficiency and directional stability increase at higher speeds. On the one hand, the rear spoiler emphasizes the dynamic elegance and, on the other hand, emphasizes the sporty look of the car in an individual way. By changing the aerodynamic characteristics, a sporty driving feeling is conveyed. The rear spoiler is stylistically and functiona
passend für BMW 6er Gran Coupé (F06)
Einbau /Montage/Installation 1 Kleben mit Klebeband
English-French becquet lèvre, rear spoiler lip, lèvre de spoiler arrière, Trunk
Hersteller fly design
EAN 4065446631474
Montage Einfache Montage, keine Bohrarbeiten
Farbe bitte sieh Produktscbeschreibung
Material aus ABS harte plastik material
Baujahr Model years seit 2011
Andere benennung DIFFUSOR FLAP ANSATZ Flips
Allgemeine Begriffe Spoiler, Diffusor, Splitter, Frontlippe, Lippe, Flap, Frontansatz
Einbauposition Hinten
Einbauposition Links
Einbauposition Oben
Einbauposition Rechts
Einbauposition Unten
Einbauposition Vorne
Einbau /Montage/Installation 2 Vor Montage, Oberfläche sauber & trocken machen
Alternative name Trunk, Lid, Ducktail, Kofferraum, Heckansatz, Heckschürze, wing
Herstellernummer 5337267900008
Produktgruppe Kofferraumspoiler, Heckflügel, Flügellippe, Abrisskante, Splitter
Produkttyp Kofferraumflügel, Kofferraum Lippe, Flügellippe, Heckflügel
Anzahl der Einheiten 1
Allgemeine Suchwörter Flaps, Karosserie, Stoßstange, flaps, heckstoßstange, universal
Produktart Heckspoiler, Heckspoilerlippe