Popular
Product Introduction
If you choose the one with the remote control it's without batteries.
Features:
1. The product with power failure memory, with start-stop switch, can be connected to external start-stop switch control, can be set to power on the drive default whether to turn on the output, to meet a variety of customer control requirements
2. Motor soft start function, start the motor current increases slowly, no impact can effectively protect the motor, extend the life of the motor and drive
3. Duty cycle 0-100% adjustable, can be set to start the upper and lower limits of the duty cycle and the operating frequency, to facilitate the operation of the customer according to the characteristics of their own motor operation use
4. Digital encoder 360 degrees stepless speed regulation, than ordinary potentiometer adjustment, higher precision, longer life, good stability.
5. With the standard 5135 meter housing, practical, simple and beautiful, convenient for customers to install.
6. Optional remote control, realize long-distance wireless control operation, more simple and sensitive.
Parameter:
Working voltage: DC7V-35V/DC7-60V
Maximum power: 200W/600W
Rated current: 7A/15A
Adjustable frequency range: 1KHz~99KHz adjustable, 1KHz step, default frequency 20KHz, accuracy of about 1%.
PWM duty cycle: 0%-100% 1%
Step external size ：Length 79MM*Width 42MM*High 26MM (open hole size length 76MM*39MM)
Remote control distance ：5-30 meters (related to the working environment)
Remote control parameters : EV1527 chip, frequency 433Mhz
Operating instructions:
Digital encoder knob operation:
In the default interface: (default display duty cycle)
Short press--Switch motor start and stop
Counterclockwise rotation--duty cycle decreases.
Clockwise rotation - duty cycle increase
Long press for 5 seconds--Enter the setting interface
After entering the setting interface:
Short press ---- to select setting parameter, the setting parameter is switched between power-on whether to turn on the output or not (ON is on OFF is off) Duty cycle lower limit, duty cycle upper limit and working frequency. The lower duty cycle limit is displayed in the form of ("L" + two digits, the upper duty cycle limit is displayed in the form of "H" + two digits or "100"). "F" + two digits) Counterclockwise rotation - the corresponding setting parameter decreases.
Clockwise rotation - the corresponding setting parameter is increased.
Long press for 2 seconds - exit the setting interface
Back PCB reserved STOP port: can be connected to the external switch button or 3.3V level, the button closed or 3.3V level pull down a little to switch the motor start / stop state.
Remote control code learning method.
Open the governor shell power on the side of the wireless receiver module there is a button, press this key for 2 seconds after the release of the red light is on, then press any key on the remote control LED off on the learning code, and automatically exit the learning state, to learn more remotes and then repeat this step. To learn more remotes and then repeat this step. Up to 40 remotes more than will cover the beginning of learning, the same remote control or address code of the same remote control repeat learning will first check whether there is, if there is already will not take up the storage.
Compatible with all fixed code coding chips: such as PT2262, PT2260, SC2260, EV1527, PT2240, SC1527, HS1527, RT1527 and so on.
40 remote control storage capacity, frequency 433M
Clear code: Long press the setup key on the board for 10 seconds after power on, then release the red light on the board will flash 6 times rapidly, at this time the remote control is all cleared.
Attention:
1. The input of this governor must be connected to DC, can not be connected to low-voltage AC, or high-voltage 220V AC
2. The governor main control circuit has input reverse protection, reverse will not burn, but the large capacitors are not protected for a long time reverse capacitance will be damaged
3. This governor is mainly for two-line brush motor speed, in principle, the brush motor does not need to be divided into positive and negative, if connected to the direction is not right, just adjust the motor two wires on the line (some of the small power two-line brushless fan can also be used to regulate the effect is slightly worse)
Package include:
Voltage controller *1
Remote control *1 (optional)
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Product Introduction
If you choose the one with the remote control it's without batteries.
Features:
1. The product with power failure memory, with start-stop switch, can be connected to external start-stop switch control, can be set to power on the drive default whether to turn on the output, to meet a variety of customer control requirements
2. Motor soft start function, start the motor current increases slowly, no impact can effectively protect the motor, extend the life of the motor and drive
3. Duty cycle 0-100% adjustable, can be set to start the upper and lower limits of the duty cycle and the operating frequency, to facilitate the operation of the customer according to the characteristics of their own motor operation use
4. Digital encoder 360 degrees stepless speed regulation, than ordinary potentiometer adjustment, higher precision, longer life, good stability.
5. With the standard 5135 meter housing, practical, simple and beautiful, convenient for customers to install.
6. Optional remote control, realize long-distance wireless control operation, more simple and sensitive.
Parameter:
Working voltage: DC7V-35V/DC7-60V
Maximum power: 200W/600W
Rated current: 7A/15A
Adjustable frequency range: 1KHz~99KHz adjustable, 1KHz step, default frequency 20KHz, accuracy of about 1%.
PWM duty cycle: 0%-100% 1%
Step external size ：Length 79MM*Width 42MM*High 26MM (open hole size length 76MM*39MM)
Remote control distance ：5-30 meters (related to the working environment)
Remote control parameters : EV1527 chip, frequency 433Mhz
Operating instructions:
Digital encoder knob operation:
In the default interface: (default display duty cycle)
Short press--Switch motor start and stop
Counterclockwise rotation--duty cycle decreases.
Clockwise rotation - duty cycle increase
Long press for 5 seconds--Enter the setting interface
After entering the setting interface:
Short press ---- to select setting parameter, the setting parameter is switched between power-on whether to turn on the output or not (ON is on OFF is off) Duty cycle lower limit, duty cycle upper limit and working frequency. The lower duty cycle limit is displayed in the form of ("L" + two digits, the upper duty cycle limit is displayed in the form of "H" + two digits or "100"). "F" + two digits) Counterclockwise rotation - the corresponding setting parameter decreases.
Clockwise rotation - the corresponding setting parameter is increased.
Long press for 2 seconds - exit the setting interface
Back PCB reserved STOP port: can be connected to the external switch button or 3.3V level, the button closed or 3.3V level pull down a little to switch the motor start / stop state.
Remote control code learning method.
Open the governor shell power on the side of the wireless receiver module there is a button, press this key for 2 seconds after the release of the red light is on, then press any key on the remote control LED off on the learning code, and automatically exit the learning state, to learn more remotes and then repeat this step. To learn more remotes and then repeat this step. Up to 40 remotes more than will cover the beginning of learning, the same remote control or address code of the same remote control repeat learning will first check whether there is, if there is already will not take up the storage.
Compatible with all fixed code coding chips: such as PT2262, PT2260, SC2260, EV1527, PT2240, SC1527, HS1527, RT1527 and so on.
40 remote control storage capacity, frequency 433M
Clear code: Long press the setup key on the board for 10 seconds after power on, then release the red light on the board will flash 6 times rapidly, at this time the remote control is all cleared.
Attention:
1. The input of this governor must be connected to DC, can not be connected to low-voltage AC, or high-voltage 220V AC
2. The governor main control circuit has input reverse protection, reverse will not burn, but the large capacitors are not protected for a long time reverse capacitance will be damaged
3. This governor is mainly for two-line brush motor speed, in principle, the brush motor does not need to be divided into positive and negative, if connected to the direction is not right, just adjust the motor two wires on the line (some of the small power two-line brushless fan can also be used to regulate the effect is slightly worse)
Package include:
Voltage controller *1
Remote control *1 (optional)
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.