5m brake line brake pipe Ø 4.75mm steel line connector set for Maybach

Set, 10m steel brake line (with powder coating), incl. 10x quick connectors without flaring + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Brake line screw connection:
- Flaring type: no flaring necessary!
- System: double cutting ring
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Thread: M9 x 1

Brake line connector:
- Flaring type: no flaring necessary!
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 12
- Thread: M9 x 1

Metal pipe cutter, brake lines:
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x quick connectors without flaring + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Brake line screw connection:
- Flaring type: no flaring necessary!
- System: double cutting ring
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Thread: M9 x 1

Brake line connector:
- Flaring type: no flaring necessary!
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 12
- Thread: M9 x 1

Metal pipe cutter, brake lines:
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x quick connectors without flaring + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Brake line screw connection:
- Flaring type: no flaring necessary!
- System: double cutting ring
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Thread: M9 x 1

Brake line connector:
- Flaring type: no flaring necessary!
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 12
- Thread: M9 x 1

Metal pipe cutter, brake lines:
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x quick connectors without flaring + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Brake line screw connection:
- Flaring type: no flaring necessary!
- System: double cutting ring
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Thread: M9 x 1

Brake line connector:
- Flaring type: no flaring necessary!
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 12
- Thread: M9 x 1

Metal pipe cutter, brake lines:
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10 quick connectors for brake lines 4.75 mm 3/16" without flaring

- Repair of 4.75mm brake lines made of copper, copper-nickel or steel
- for cable diameter: Ø 4.75 mm or 3/16"
- no flanging necessary!
- System: double cutting ring
- Thread: M9x1
- Length: 35mm
- SW: 11/12mm

10 quick connectors for brake lines 4.75 mm 3/16" without flaring

- Repair of 4.75mm brake lines made of copper, copper-nickel or steel
- for cable diameter: Ø 4.75 mm or 3/16"
- no flanging necessary!
- System: double cutting ring
- Thread: M9x1
- Length: 35mm
- SW: 11/12mm

10 quick connectors for brake lines 4.75 mm 3/16" without flaring

- Repair of 4.75mm brake lines made of copper, copper-nickel or steel
- for cable diameter: Ø 4.75 mm or 3/16"
- no flanging necessary!
- System: double cutting ring
- Thread: M9x1
- Length: 35mm
- SW: 11/12mm

10 quick connectors for brake lines 4.75 mm 3/16" without flaring

- Repair of 4.75mm brake lines made of copper, copper-nickel or steel
- for cable diameter: Ø 4.75 mm or 3/16"
- no flanging necessary!
- System: double cutting ring
- Thread: M9x1
- Length: 35mm
- SW: 11/12mm

10 quick connectors for brake lines 4.75 mm 3/16" without flaring

- Repair of 4.75mm brake lines made of copper, copper-nickel or steel
- for cable diameter: Ø 4.75 mm or 3/16"
- no flanging necessary!
- System: double cutting ring
- Thread: M9x1
- Length: 35mm
- SW: 11/12mm

5m steel brake line (with powder coating)

Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating)

Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating)

Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating)

Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating)

Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x quick connectors without flanging

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flaring type: no flaring necessary!
System: double cutting ring
for brake line Ø: 4.75 mm
Key size: SW 11
Thread: M9x1

Brake line connector:
Flaring type: no flaring necessary!
suitable for brake line Ø: 4.75 mm
Key size: SW 12
Thread: M9x1

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x quick connectors without flanging

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flaring type: no flaring necessary!
System: double cutting ring
for brake line Ø: 4.75 mm
Key size: SW 11
Thread: M9x1

Brake line connector:
Flaring type: no flaring necessary!
suitable for brake line Ø: 4.75 mm
Key size: SW 12
Thread: M9x1

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x quick connectors without flanging

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flaring type: no flaring necessary!
System: double cutting ring
for brake line Ø: 4.75 mm
Key size: SW 11
Thread: M9x1

Brake line connector:
Flaring type: no flaring necessary!
suitable for brake line Ø: 4.75 mm
Key size: SW 12
Thread: M9x1

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x quick connectors without flanging

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flaring type: no flaring necessary!
System: double cutting ring
for brake line Ø: 4.75 mm
Key size: SW 11
Thread: M9x1

Brake line connector:
Flaring type: no flaring necessary!
suitable for brake line Ø: 4.75 mm
Key size: SW 12
Thread: M9x1

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

10m steel brake line (with powder coating), incl. 10x quick connectors without flanging

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flaring type: no flaring necessary!
System: double cutting ring
for brake line Ø: 4.75 mm
Key size: SW 11
Thread: M9x1

Brake line connector:
Flaring type: no flaring necessary!
suitable for brake line Ø: 4.75 mm
Key size: SW 12
Thread: M9x1

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 5m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 5 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 5m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 5 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 5m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 5 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 5m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 5 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 5m steel brake line (with powder coating) + metal pipe cutter

Brake line
- Length: 5 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

5m steel brake line (with powder coating), incl. 10x screw connections and 5x connectors

Brake line:
Tube Ø 4.75mm
Wall thickness simple: 0.7 mm
According to din 74 234
Special feature: rust-resistant, powder-coated

Brake line screw connection:
Flare type: F (German/European standard)
for brake line Ø: 4.75 mm
Key size: SW 11
Length: 17mm
Inner Ø: 5 mm
Screw-in depth: 11 mm
Thread: M10x1

Brake line connector:
Flare type: F (German/European standard)
suitable for brake line Ø: 4.75 mm
Key size: SW 14
Length: 24mm
Thread: M10x1

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x screw connection and 5x connector + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake line screw connection:
- Flaring type: F (German/European standard)
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Length: 17mm
- Inner Ø: 5 mm
- Screw-in depth: 11 mm
- Thread: M10 x 1

Brake line connector:
- Flaring type: F (German/European standard)
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 14
- Length: 24mm
- Thread: M 10 x 1

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x screw connection and 5x connector + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake line screw connection:
- Flaring type: F (German/European standard)
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Length: 17mm
- Inner Ø: 5 mm
- Screw-in depth: 11 mm
- Thread: M10 x 1

Brake line connector:
- Flaring type: F (German/European standard)
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 14
- Length: 24mm
- Thread: M 10 x 1

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x screw connection and 5x connector + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake line screw connection:
- Flaring type: F (German/European standard)
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Length: 17mm
- Inner Ø: 5 mm
- Screw-in depth: 11 mm
- Thread: M10 x 1

Brake line connector:
- Flaring type: F (German/European standard)
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 14
- Length: 24mm
- Thread: M 10 x 1

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x screw connection and 5x connector + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake line screw connection:
- Flaring type: F (German/European standard)
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Length: 17mm
- Inner Ø: 5 mm
- Screw-in depth: 11 mm
- Thread: M10 x 1

Brake line connector:
- Flaring type: F (German/European standard)
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 14
- Length: 24mm
- Thread: M 10 x 1

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Set, 10m steel brake line (with powder coating), incl. 10x screw connection and 5x connector + metal pipe cutter

Brake line
- Length: 10 m
- Tube Ø: 4.75 mm
- Wall thickness simple: 0.7 mm
- According to din 74 234
- Special feature: rust-resistant, powder-coated

Note: Have the brake lines crimped (a specialist workshop), otherwise they are not permitted for German vehicles according to the StVZO (Road Traffic Licensing Regulations).

Brake line screw connection:
- Flaring type: F (German/European standard)
- for brake line Ø: 4.75 mm
- Wrench size: SW 11
- Length: 17mm
- Inner Ø: 5 mm
- Screw-in depth: 11 mm
- Thread: M10 x 1

Brake line connector:
- Flaring type: F (German/European standard)
- suitable for brake line Ø: 4.75 mm
- Wrench size: SW 14
- Length: 24mm
- Thread: M 10 x 1

Metal pipe cutter, brake lines
- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Brake lines are a part of the braking system in a vehicle and are used to transport brake fluid from one part of the system to another. They consist of a metal pipe that is made from steel and is usually attached to the brake cylinders, brake boosters and brake lines themselves. Brake lines can break or leak due to wear, rust or damage from external influences, which can lead to brake system failure. It is therefore important to regularly check the brake lines and replace them if necessary.

Metal pipe cutter, brake lines

- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Using a brake line pipe cutter is crucial to ensuring that a vehicle's braking system is functioning properly. Incorrectly cut brake lines can lead to leaks and compromise braking performance, posing a significant safety risk. Therefore, it is important to use high-quality pipe cutters and carry out the cutting process carefully.

Metal pipe cutter, brake lines

- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Using a brake line pipe cutter is crucial to ensuring that a vehicle's braking system is functioning properly. Incorrectly cut brake lines can lead to leaks and compromise braking performance, posing a significant safety risk. Therefore, it is important to use high-quality pipe cutters and carry out the cutting process carefully.

Metal pipe cutter, brake lines

- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Using a brake line pipe cutter is crucial to ensuring that a vehicle's braking system is functioning properly. Incorrectly cut brake lines can lead to leaks and compromise braking performance, posing a significant safety risk. Therefore, it is important to use high-quality pipe cutters and carry out the cutting process carefully.

Metal pipe cutter, brake lines

- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Using a brake line pipe cutter is crucial to ensuring that a vehicle's braking system is functioning properly. Incorrectly cut brake lines can lead to leaks and compromise braking performance, posing a significant safety risk. Therefore, it is important to use high-quality pipe cutters and carry out the cutting process carefully.

Metal pipe cutter, brake lines

- Material: cast aluminum, cast aluminum, plastic
- Color: Black, aluminum colors
- Dimensions: 75 x 54 x 25 mm
- Cutting area (inches): 1/8" - 1 1/8"
- Cutting range (mm): 3mm - 28mm
- for cutting copper, brass, aluminum and stainless steel pipes
- the cutting wheel is made of high-quality alloy steel
- sharp wheel, durable and high quality
- easy to use and improves work efficiency

Using a brake line pipe cutter is crucial to ensuring that a vehicle's braking system is functioning properly. Incorrectly cut brake lines can lead to leaks and compromise braking performance, posing a significant safety risk. Therefore, it is important to use high-quality pipe cutters and carry out the cutting process carefully.