980nm 30mw Infrared IR Laser Dot Module w/TTL

Notice:980nm IR lasers can't be seen the light by bare eyes. It must be used with the Infrared Camera or other equipment.

Wavelength :980nm
Ouptut Power :30mW
Current <100mA
Power supply :3-5VDC
Dimension: 8x13mm
TTL frequency:0-15KHz
TTL modulation Voltage:0-5V Off low, high open, normal status open

The Lens focus is adjustable, not fixed, can adjust to an appropriate spot size, and then fix it.

Three-wire input, the red line is positive, black line is negative,  TTL signal yellow line is positive

Features:
The 980nm Laser is invisible, but can be seen by 980nm display board, it will be displayed as a green dot on the board.
        
                .
This 980nm laser module with driver built-in is an industrial electronic component and  used for Industrial testament, Lab.

Working Voltage 5.0V, red wire for 5V+, black wire commonly for 5V- and also for TTL -, Yellow wire for TTL +.
If you only connect its black wire and red wire, the laser would not work, you also need to connect its yellow wire (TTL+) to 5v+.

Shippment:
1.Every parcel will be registered with tracking number.

2.International shipping requires complicated shipping procedures (such as both countries customs, transit stations etc.), also will be affected by many factors, such as holidays, weather conditions et. If the transportation time is not normal, please contact us