Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic FOR VANOS.
Suitable for the M50B25 DME 3.1 and M50B25TU DME 3.3.1
The EMU Black stand-alone engine management system is designed to operate the most advanced and complex engines available. It is a successor of our proven system, EMU. Throughout EMU’s lifetime we collected lots of data that allows us to substantially improve the device hardware and software.
EMU Black targets race cars, road cars, motorcycles, boats, and stationary engine applications.
The EMU Black controls fueling, ignition and auxiliary systems on 1-12 cylinder engines including those with drive-by-wire throttles (E Throttle) and VVT.
It can drive up to 6 passive or 12 smart coils directly and does not require external amplifier/power modules to achieve this. Sophisticated drive-by-wire strategies provide a wide range of throttle control along with advanced plausibility (fault/error) checking for safety.
Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).
The EMU Black features more built-in value than any other aftermarket ECU. It easily matches the functionality of other stand-alone management systems with multiple inputs and outputs. Unlike many other ECU systems, the EMU Black has built-in wideband lambda input (Bosch LSU 4.2, and LSU 4.9 sensors wire directly in), MAP control connector (4 bar MAP sensor on board), 2 EGT probe inputs and an input to directly connect a Flex Fuel ethanol content sensor. All of this provides greater flexibility, reduces costs and negates the requirement for external or supplemental signal conditioning control systems and the associated wiring that other management systems require.
Whats Included!
Emu Black ECU
BMW E36 M50 VANOS Adaptor
Tuning Cable
Pinout Diagram
The EMU Black is assembled according to IPC-S-815A standards to ensure high reliability of the product. The device is manufactured on an automated assembly line with optical inspection, automatically tested including burn-in. The PCB board quality and design, special surface coating and IP65 enclosure keeps the device operational in the harshest environments. The components used allow continued operation in a very wide temperature range (AECQ-100 GRADE 2 (-40 to +105˚C).
GENERAL | |
Temperature range | AECQ100 GRADE2 (-40 to +105˚C) |
Reverse battery protection | Yes, internal |
Operating voltage | 6-22V, immunity to transients according to ISO 7637 |
Enclosure | IP 65, custom CNC machined aluminium |
Size (mm) and weight(g) | 150x72x31, 390 |
Connectors | 1 x 24, 1 x 39 FCI Automotive connector |
PC communication | USB (with PC client software), serial, CAN |
OUTPUTS | |
Injector outputs | 6 protected outputs 5A, low side |
Ignition outputs | 6 outputs 7A(15A peak) (passive & active coils supported) |
Aux outputs | 6 protected outputs 5A, low side |
Other outputs | Full bridge up to 7A, can be used as separate outputs or 2 H-Bridges |
WBO heater | Protected low side up to 5A |
Communication | Serial, CAN BUS 2.0B |
INPUTS | |
Analog inputs | 9 inputs, resolution 10Bits, 0-5V (protected) |
EGT inputs | 2 for K-Type thermocouple |
Knock sensor | 2 inputs |
Oxygen sensor | LSU 4.2, LSU 4.9 or Narrow band |
Trigger inputs | 3 (primary, 2 cams) Hall/ VR software selectable |
VSS | 1 (Hall / VR) |
Flex Fuel Sensor | Yes |
Switch inputs | 3 inputs, switched to ground |
SENSORS | |
Temperature sensors | IAT, CLT, Oil temperature, AC evap temperature |
Pressure sensor | MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor, Back pressure |
Oxygen sensor | LSU 4.2 or 4.9 (built in controller), Narrow band, external WBO controllers |
Speed | Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) |
FUELING | |
Injectors | Up to 8 HiZ injectors (sequential) |
Injection angle control | 0-720 deg, start or end of injections |
Battery compensation | User defined, wizard for popular injectors |
Fueling strategies | VE based speed density, Alpha N |
Air charge temp. | Based on IAT and CLT |
VE table | 2 tables 16×20 (Load x RPM), resolution of 0.1% |
Individual cylinder trim | Yes |
Staged injection | Yes |
Additional correction | Oxygen sensor corrections, EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor |
Lambda based real time correction | Using Lambda target table |
Acc. / Deceleration enrichment | Yes |
IGNITION | |
Ignition outputs | 6 for passive and active coils (software selectable) |
Supported triggers | N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Wiliams / Alpine, Colt 1.5CZ, Wrangler |
Ignition angle table | 2 tables 16×20 (Load x RPM), resolution of 0.5 Deg |
Per cylinder trim | Yes |
Dwell time battery compensation | Used defined, wizard for popular coils |
Odd fire compatibility | Application dependent |
Additional correction | CLT, IAT, TPS vs MAP, Nitrous, Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment |
KNOCK SENSING | |
Channels | 2 |
Resonant frequency range | 1-20kHz, 3rd order AAF |
Sampling | Ignition event driven, knock window |
Actions | Ignition retard, fuel enrichment, dashboard indication |
IDLE CONTROL | |
Control type | PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar), ignition cut, fuel cut |
Control strategy | Open / Close loop , ignition angle control |
VE correction | Yes, for Alpha-N |
Corrections | AC clutch, coolant fan, analog input |
BOOST CONTROL | |
Boost ref and target tables | 2 sets 10×10 (TPS vs RPM) |
Control strategies | Open / Closed loop (PID based) |
Corrections | Gear, VSS, IAT, EGT |
DRIVE BY WIRE | |
Control strategy | Advanced 3D PID + static friction compensation |
Supported throttles | All with DC motor and current requirement lower than 6.5A
Wizard for 28 popular electronic throttles |
PPS to throttle position characteristic | 3D table |
BLIP support | Yes |
ALS support | Yes |
TRACTION CONTROL | |
TC strategy | Delta RPM, gear compensation |
Torque reduction | Spark cut using 3D table (16×20) |
Sensitivity control | 10 position rotary switch |
VARIABLE VALVE TIMING | |
Supported systems | VVTi, MiVec, VANOS, Double Vanos |
Number of camshafts | 2 |
Control strategy | PID based closed loop, CAM angle target tables 12×12 |
FLEX FUEL | |
Ethanol content measurement | Yes |
Fuel temperature measurement | Yes |
Tables blending | VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup |
Fuel temperature PW correction | Yes |
SPORT | |
ALS | 2 independent ALS setting, DBW support |
Shift light | Per gear shift light |
Launch control | Yes |
Gear cut | Yes (Open loop), DBW blip supported
Source: Switch, load cell, CAN |
Pit limiter | Yes |
Rolling anti lag | Yes |
ENGINE PROTECTION | |
Fail safe values for critical sensors | Yes |
Dashboard indication of failures | Yes, user defined |
Over temperature engine protection | Yes (oil and coolant), user defined, RPM limit |
Low oil pressure protection | Yes, user defined, shut off |
Fuel pressure protection | Yes, fuel dose compensation, RPM limit, engine shut off |
High exhaust temperature | Alarm, per cylinder fuel trim, boost limit |
CAN BUS | |
CAN standard | 2.0B 125, 250, 500, 1000 kbps |
Supported CAN Dashes | ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM |
Supported OEM CAN streams | BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST, EVO X (AYC support) |
OTHER | |
Unused injection outputs can be used as AUX output | Yes |
Output functions | Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output, AC clutch, main relay, speedometer, tachometer |
Password protection | Yes, 2 levels |
Timers | Fuel, Ignition, Boost, timers controlled by virtual outputs |
Serial dashboard support | AIM, RaceTechnology |
Autotune | Yes |
Built in trigger scope | Yes |
Logging | Real time logging to PC computer, logging on external loggers (serial / CAN) |
Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal.
Thanks You
Why buy from us? Consistent Quality and Customer Service:
Be confident you will get what you ordered; and if by chance a problem occurs we fix the issue very fast with no quibbles!
Get the item quickly and cheaply: Most of our items are either Free or Carry a small nominal fee!
Know it will be easy to return. Your purchased item can be returned in line with eBays best practices and being a small business we will always look to solve issues even after these periods.
Buy items hassle free – Just look at our feedback to see how good we really are!
Postage and Packaging:
We use high quality bubble lined jiffy bags for all small order to ensure a damage free transit & High Quality Double Walled Boxes for the heavier & larger items.
All UK Orders are Sent Via 1st class service or 24 hour courier, All orders are fully insured. Posted within 24 hours unless advert dispatch time or description states otherwise. Orders before 3pm are usually sent same day.
International Orders are sent Via DHL EXPRESS. We will combined shipping but PLEASE make your purchases and request an invoice before you pay! All tracking will be added to the order details as soon as it is obtained.
Tracking numbers automatically attach to every order once dispatched
Request a Quote for Shipping if your Country is Excluded.
It’s important to make sure PayPal and EBay postage addresses are up to date as these are the addresses we send to only.
Problems should they occur:
We go to great lengths to ensure mistakes are not made, however we are only human; So if there is any issues with your order please drop us a message, email or phone call and we will get it correct as soon as possible.
If you think there is anything we can do to improve our services or product we would love to hear from you- Seriously we can only improve if we have input from our customers.
Feedback:
We use an automated system that leaves feedback as soon as it is received, this ensures the transaction is complete and you are 100% happy with our service.
If you feel that we do not deserve 5 stars for any reason, please contact us and explain before leaving feedback as we may be able to correct any issues you may have :)
Advice:
Any queries about any item/ postage etc is free, Drop us a message and ask away, there is also a lot of information over on our Facebook Page.
We are always happy to help :)
SHOP BHP is a Trading Name of Brands Hatch Performance LTD