Heading

EBAY:  Please Note --This auction is for educational material.  There are NO TOOLS or anything else that violates EBAY policies included in this auction.


Please know, because of Ebay policies, many of our products are not listed on this site.


This Auction is for a training program which teaches automotive locksmithing.  

Introduction To Automotive Locksmithing

 Only 219.99 

Course Description

Locksmith Training DVD - AUTO 1 Intro To Automotive Locksmithing (3hr 49min.) - YouTube

Video will open in a new window



Learn Automotive Locksmithing 


Over 13 Hours of Instruction


Thousands or people make a good living doing automotive locksmithing.  We have a great program to teach these skills.  Over 13 hours of video instruction.


Course Auto 1 --  We have had many requests to make a course dealing with the skills needed to be an automotive locksmith. This course, Auto 1, is in response to those requests. Automotive locksmithing is a very large subject and it is not realistic to think that a person could watch a 45 minute course and begin work in this field. Consequently, this first course is nearly FOUR HOURS long. 


This course is divided into 18 parts:

Disc 1:

  • Part 1 Tools
  • Part 2 Understanding the Wafer Lock
  • Part 3 Comparing Ford Locks
  • Part 4 Wafer Reader Tools
  • Part 5 Vehicle and Customer ID
  • Part 6 Demo of Reader Tools
  • Part 7 Using a Fill Program

Disc 2:

  • Part 8 Using Tryout Keys
  • Part 9 Progression Cuts
  • Part 10 Pin Tumbler Locks
  • Part 11 VIN to Key Code
  • Part 12 Transponders
  • Part 13 Programmers
  • Part 14 Program Example 1
  • Part 15 Program Example 2
  • Part 16 Review
  • Part 17 What to Buy First
  • Part 18 Suggested Practice


Course Auto 2 -- Continue training as an automotive locksmith. Auto 2 picks up where Auto 1 left off. Learn more advanced skills for making automotive keys.

This course is divided into 17 parts:
  • Part 1 Tools
  • Part 2 Closer Look at Fill Programs
  • Part 3 Closer Look at A-1 kit for Ford
  • Part 4 Remove Ford 8 cut lock using A1 kits
  • Part 5 Additional Info on Picking the Ford 8 Cut Lock
  • Part 6 Disassemble and Decode the Ford 8 Cut Lock
  • Part 7 Cut a Key using the Pak-A-Punch
  • Part 8 Reassemble and Replace Ford 8 cut Lock
  • Part 9 Closer look at the Aable kit
  • Part 10 Remove Ford 8 Cut using Aable kit
  • Part 11 Drill Ford 8 cut
  • Part 12 Remove Ford 8 Cut using Aable force tool
  • Part 13 Code a Ford ignition lock
  • Part 14 Ford 8 cut non-sidebar lock
  • Part 15 Ford Focus Style Locks
  • Part 16 2003 Ford Focus — Remove and Install Ignition Lock
  • Part 17 Review and Practice


Course Auto 3 -- GM 6 Cut Locks (1 Hr. 58 Min.) –  Because you will only find these locks on holder cars we recommend that this course be completed last.

This course will focus on the 6 cut locks which were used by General Motors on the Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac. With only a few changes, GM used the same basic six cut lock system from 1935 until 2004. There are still millions of cars in use that have these locks. 

The six cut locks were slowly phased out after the introduction of 10 cut lock in 1994. We will cover 10 cut locks in Auto 4.

This course is divided in 12 parts:

  • Part 1  Tools and Resources
  • Part 2  6 Cut Lock System
  • Part 3  Glove Box Locks
  • Part 4  GM Progression Chart
  • Part 5  GM Door Locks With Codes
  • Part 6  GM Door Locks Without Codes
  • Part 7 Earlier In-Dash Ignition Locks
  • Part 8  GM Steering Columns
  • Part 9  GM Column Mounted Ignition Locks
  • Part 10  VATS
  • Part 11  GM Trunk locks
  • Part 12  Review & Practice

Course Auto 4 -- GM 10 Cut Locks – Part 1 (1 Hr. 50 Min.) – This course is a continuation of our automotive locksmith training presented in our Auto 1, Auto 2, and Auto 3 courses.

This course will focus on the GM 10 cut locks which were used by General Motors on the Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac. There are still millions of cars in use that have these locks. Most of these cars do not require a programmer. Most of them either do not require programming or have on-board programming.

This course is divided in 12 parts:

  • Part 1 Tools and Resources
  • Part 2 GM Platforms
  • Part 3 GM Lock Systems
  • Part 4 GM 10 Cut Locks
  • Part 5 MRD / Passlock 1
  • Part 6 Making A Key For A 2004 Chevy Tahoe
  • Part 7 Making A Key For 2002 Chevrolet Trail Blazer
  • Part 8 Making A Key For 2006 Cadillac CTS
  • Part 9 Making A Key For 2007 Cadillac DTS
  • Part 10 On-Board Programming
  • Part 11 Making A Key For Buick Lacrosse
  • Part 12 Review and Practice

Course Auto 5 -- GM 10 Cut Locks – Part 2 – (1 Hr. 57 Min.) This course is a continuation of our automotive locksmith training presented in our Auto 1, Auto 2, Auto 3, and Auto 4 courses. This course will continue to focus on the GM 10 cut locks. There is also a bonus section on Alpha Tec 6-Cut locks.


This course is divided in 10 parts:

  • Part 1 – Tools and Resources
  • Part 2 – Use A-1 Tool, 2002 Trailblazer
  • Part 3 – Replacing The Lock – Use A Service Pack
  • Part 4 – In-Dash Lock – 2003 Impala
  • Part 5 – In-Dash Lock – 2004 Impala
  • Part 6 – Pulling the Door Panel and Lock – 2007 Cadillac DTS
  • Part 7 – Pulling Locks – Salvage Yard Practice
  • Part 8 – Decoding GM 10 Cut Door Locks
  • Part 9 – Bonus Section – Alpha Tec 6 Cut Locks
  • Part 10 — Review and Practice


Course Auto 6 -- Chrysler Locks – This course is a continuation of our automotive locksmith training presented in our Auto 1, Auto 2, Auto 3, Auto 4, and Auto 5 courses. This course will focus on Chrysler Locks (5-Cut, 7-Cut, and 8-Cut locks). It includes a demo of removing a Chrysler ignition lock using the A1 PS5 Kit. It also includes a demo of programming a remote head transponder key using the Autek Ikey 82.


This course is divided in 14 parts:

  • Part 1 – Tools and Resources
  • Part 2 – Chrysler 5 – Pin Locks
  • Part 3 – Make A Key For A 5 – Pin Lock
  • Part 4 – Chrysler 5 – Cut Sidebar Ignition Locks
  • Part 5 – Chrysler 7 – Cut Locks
  • Part 6 – Chrysler 8 – Cut Locks
  • Part 7 – Make A Key For A 8 – Cut Lock
  • Part 8 – Remove Ignition Lock
  • Part 9 – Remove A Sidebar Ignition Using A1 PS5 Tools
  • Part 10 – Remove And Decode 8 – Cut Door Lock
  • Part 11 – Look At A Different Style Door Lock
  • Part 12 – Fobiks & Proximity Start Devices
  • Part 13 – Demo the Autek IKEY 820 Programmer
  • Part 14 – Review & Practice



Please know, because of Ebay policies, many of our products are not listed on this site.

About The Instructional Material

These are instructional videos.  They have been produced with a professional grade camera and composed with quality editing software.  The focus is on the presentation of the material.  We believe the results are very good.  The length of time given for each video is approximate. 

The videos are encoded in NTSC format to either -R or +R DVDs.  They will play on nearly all equipment that accepts this format, which is nearly all players made after 2000

Because of the ease with which DVDs can be pirated, all sales are final.  All DVD's are tested before they are shipped, however, if one is defective, we will be happy to exchange it.

Thanks for looking and good luck bidding!!

Shipping
$10.00  (Priority Mail  USPS)

Feedback

After you receive the item, please leave us positive feedback and we will do the same for you.  If you have any problems please contact us immediately.  We do everything reasonably possible to satisfy our customers.

Please See Our Other Items On Ebay.

Policies:

Initial Contact -- Please make contact with us within 24 hours of purchase. 

Payment --  Please make payment within two business days after the auction ends.  We accept PayPal.  

Shipping -- Stated shipping charges are for the 48 STATES ONLY, unless otherwise specified.  Shipping is normally by First Class mail.  Larger or heavier items may go UPS.  See the item description for the cost of shipping.  We normally ship within two business days and usually one business day after receiving cleared payment.  If there are any questions about shipping, please contact us before bidding.

If we cannot use a flat rate box there may be additional shipping charges for items shipped to Alaska or Hawaii.  Canada is normally a little higher.  We try to keep shipping charges as low as possible.

Refunds --  If you find the item is not as stated in the description please contact us immediately. If you can show us where our description was incorrect we will accept a return. The item must be returned within seven days and in its original condition and original packaging. We will refund the price of the item less shipping.  We will not make refunds on DVDs, (exchanges only).