Heavy Duty, Professional Quality Leisure Battery Split Charge Kit for Campervans and Motorhomes.
All cables are cut and pre crimped
These are high quality kits, not the cheap imported pre made kits. We only use top quality tri rated cable which is certified and traceable
Please note, The red power feed cable is in 4 seperate pre formed sections
Also suitable for many other applications
Your Leisure battery will be automatically charged while the engine is running.
Simple installation and can usually be installed and working in an hour
The kit has everything that you need to install a split charging system in your vehicle including a relay that prevents your main battery from draining while the engine is stopped.
The relay simply needs to be connected between the starter and leisure batteries and the relay will control the whole charging process automatically.
Suitable for Motor Homes Camper Vans, Day Vans 4x4s, Boats, Cars and Mobile Workshops.
Voltage sensing systems are especially suited for vehicles with canbus controlled wiring.
This type of kit does not need an ignition feed or any additional wiring and are very simple kit to install,
Your main battery will not be drained when the engine is not running.
It cuts in at 13.3V and cuts out at 12.8V so will not take any power from your main battery unless the alternator is charging to capacity
The Kit Contains
12 Volt Heavy Duty 140 A Voltage SensitiveRelay
2 x 0.25 metre red 70amp cable from Battery to fuse holder leads (Lead terminals pre-crimped)
1 x 0.5 metre red 70amp cable Relay to fuse holder lead (Lead terminals pre-crimped)
1 x 4 metre 140amp Relay to battery lead (Lead terminals pre-crimped)
1 x 1 metre 70amp of Black earth cable (Lead terminals pre-crimped)
2 metres of split conduit to protect your wiring.
2 x Midi inline fuse holders
4 x Fuses (2 for use and 2 spares)
2 x battery terminals
10 x cable ties
10 x adhesive cable tie bases