This item has been printed under license by Witch Song Miniatures.

2x2 models will be printed at 0.03mm layer height.

3x3 and 4x4 models will be printed at 0.05mm layer height.

Printed in either Elegoo 8k Red Clay Standard Resin mixed with tenacious or 8k Space Grey ABS like resin mixed with tenacious, to make the miniatures less prone to breaking . Due to the item being made from UV Resin exposure to sunlight will continue to cure the model and may cause the model to become brittle. Recommended to avoid exposure to sunlight and paint in order to prevent the models from over curing.

Items sent have had their printing supports removed before curing, this helps to limit the signs of scarring on items, an element of model will require clean up by the purchaser before assembly and painting. Suggested tools to do this: sandpaper, sanding sticks, hobby knife.

Some items come in multi parts, these items will require to be glued together.

This item is not a toy and is not suitable for persons under the age of 16. Care is to be taken when preparing and handling resin products, correct PPE should be used in order to prevent inhalation of dust caused by sanding items. Resin products can break and have sharp edges, under no circumstances is resin to be ingested.