Description:
SEAGATE 94191-766 5.25FH 676MB 50 PIN SCSI HARD DRIVE from an IBM PC and compatibles. 5.25 full height form factor!
Specifications:
SCSI Drive ID is binary coded jumper position (most significant bit on), jumper in position 1 would be Drive ID 1 as this one is set as. In a multiple drive config make sure IDs are not the same! Check the drive manual on the Internet for different configs.
The balanced rotary arm actuator design of the Wren 6 allows it to
be mounted in any orientation. All drive performance characterization
however, has been done with the drive in horizontal (disc level) and
vertical (drive on its side) orientations, and these are the two
preferred mounting orientations.
Mounting Holes (6-32 UNC). Four on bottom, two on each side. Max.
screw length into chassis is 0.14 in. (3.55 mm)
The non-shielded cable connector shall be a 50 conductor connector
consisting of two rows of 25 female contacts with adjacent contacts
100 mils apart.
The drive has a 4 pin DC power connector mounted on the PCB.
SCSI controller and a cable are required to operate this drive and are not included!
Additional information:
This is a used item in good visual and a perfect working condition!
Casing has some signs of usage visible from the photos! The item is tested and formatted! Boots into C:
Those old electronic devices are cool to try and play with but can be annoying if you plan to use them on a day to day basis. There is no guarantee that they will work on a different environment other then what they had been part of.
Shipping is with Air mail with priority and a tracking number. It takes between 10 to 20 business days in continental Europe and 20 to 30 business days worldwide. Sometimes it takes less than that, sometimes it takes more. PM me if you have any issues.
Initial tracking can be done here:
https://www.bgpost.bg/IPSWebTracking/IPSWeb_submit.htm
Substantial tracking can be done on your country's postal web site after some time.
Regards,
Computer Caveman