GRAPHIC EQUALIZER — 31 digital filters on ISO
center frequencies, width from 0.5 to 1.0 octave in .01
octave increments, user selectable +/- 6 dB or 12 dB boost/
cut.
COMPRESSOR/LIMITER — Threshold: +32 dBV to
-30 dBV in 1 dB steps. Ratio: 1:1, 1.4, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 32 or 4. Knee: hard/soft variable 1 to 40 dB with
center of range = threshold. Attack: 1 to 99 mSec in 1
mSec steps. Release: .05 to 5 sec. in .01 sec steps. Peak
limits: -30 dBV to 32 dBV in 1 dB steps.
DIGITAL DELAY — 1.38 mSec to 999.96 mSec in 20
microsecond steps. Programmable in milliseconds, feet
or meters.
PASSWORD CONFIGURATION — 5 numeric characters.
LOAD & RECALL CONFIGURATIONS & RESPONSE CURVES — 65 user defined, 1 factory default,
3 snapshots, 1 most recent front panel configuration
(power down save).
INPUT/OUTPUT — Input impedance: balanced >10K
Ohms, PIN 2 high. Output impedance: balanced 50 Ohms
nominal, PIN 2 high. Input/output maximum signal levels: balanced +26 dBV peak.
Output load: 600 Ohms balanced. Bypass: true power-off bypass.
I/O connectors:
XLR-3. 1 input, 2 output configurations. Processing may
be assigned to either or both outputs, with identical values, except digital delay end output level settings, which
can be set independently for each output via software.
PERFORMANCE — Frequency response: 10 Hz to
20 kHz, 0.2 dB at+22 dBV. Signal to noise ratio: >105 dB
(with ClipGuard). Total harmonic distortion: <0.01% at 22 dBV at 1 kHz. Dynamic range: >110 dB (with
ClipGuard). Headroom: +22 dB peak at 4 dBV nominal
input.
POWER — 50/60 Hz available in 100V, 120V, 230V;
20W.
DIMENSIONS — 2-U rack mount; 19 x 1.75 x 9.5 in.;
48.3 x 4.5 x 22.9 cm. Weight: 8.0 lb. (3.6 kg).
The unit shall be the Sabine GRAPHI-Q GRQ3101