eBay

Multifunction CR-C Common Rail Injector Tester Injector Detector Driver Tester!

Description

- CR-C multifunctional common rail injector detector uses imported PWM control chip. It can accurately and efficiently simulate the driving signal of ECU to the fuel injector, such as pre injection, discharge point, full load point and other conditions. The fuel injector can drive a variety of brands, such as BOSCH, Denso and Delphi common rail injector.

- CR-C multifunctional common rail injector detector is easy to operate. It can meet the detection of common rail injector together with common nozzle tester. So it effectively lowers the investment threshold of maintenance equipment. The detector is small in size and easy to carry, and can help customers to detect and maintain common rail injector en route, which can greatly improve work efficiency.

andnbsp;

Highlightsandamp;Highlights:

- to run or stopandmdash;to turn on and off the signal output.

- Drive modeandmdash;Select the drive mode by the left and right keys.

- MS knob: to adjust pulse width.

- HZ knob: to adjust frequency.

- Signal outlet: to connect injector harness.

- Power supply: to turn on and off the main power

- Operational Method

1. The common rail injector is directly connected or loaded into the clamp and connected to the common hand pressure calibrator.

2. Select the appropriate plug according to the injector brand and then connect the wiring harness to the injector.

3. According to the injector brand, select the corresponding drive mode. At this time, you can hear the injector solenoid valve suction armature "pa,pa" sound.

4. Provide the proper injection pressure by continuously lowering the lever of the calibrator. The general pressure value is 30-40MPA, and the atomization performance of the injector can be observed at this time.

Through the external cylinder, fuel oil quantity and return oil quantity of fuel injector can be detected.

andnbsp;

Detail s

- Product type:CR-C multi function of common rail injector tester

- Test range: the atomization effect,pre injection,the discharge point,full load point.

- Suitable for:Bosch,Delphi,Denso,domestic and common type

- Power supply:AC110-240V

- Working temperature:-30 degrees Celsiusandmdash;70 degrees Celsius

- Dimensions:110*250*190(millimeter)

- The adjustable pulse width:10MS

- Adjustable frequency:30HZ

- Operator Interface

- LCD screen: The upper left corner of the instrument is used to display the frequency pulse width value.

- Indicator light: to show current status and drive mode.

andnbsp;

Maintenance and precautions

1.To ensure the service life of the instrument, the instrument should not be used in direct sunlight, the place should be more level, is strictly prohibited to fall, touch.

2.It is strictly forbidden to use strong solvent (such as: stupid, nitro oil) to clean the casing

3.Instrument external interface shall be used strictly according to the method stated in the instruction manual, and the connection shall not be altered without authorization.The instrument is impulse driven to the injector and can not be measured by the general multimeter.When this table fails during use, the plug shall be immediately removed and returned to the manufacturer for three packet service.

4. The meter from the date of sale within three months under normal conditions of use, appear non-human fault warranty scope, please user product and warranty card (no match) were sent to special vendors, life-long repair of instrument factory. This instrument is not allowed to open at will, otherwise it will not be guaranteed.

andnbsp;

PaymentDelivery detailsFeedbackReturn policyContact us

Payment

We accept PayPal and bank transfer.

All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal.

Delivery details

4-9 working days to:UK by DHL

5-7 working days to:France ,Germany ,spain ,Italy

6-10 working days to:Other countries

Feedback

We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!

Return policy

Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.

a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.

b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.

c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.

Thank you.

Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.