Number 1 specialist of Bang & Olufsen products and cabling solutions on eBay since 2006. Offering a broad range of high quality, professionally manufactured products ranging from complete audio/video systems to cables for connecting all of the products together...
AV Solutions Store | Home Page | Please Click HERE
Bang & Olufsen BeoLab 3/9/4000(Mk2)/6002/8002
to RCA (Pre-Amp) Cables (Stereo Pair)
Version: Super High-Quality Studio Grade (SHQ)
(12 Metres per Cable)
Our new range of 'Studio Quality RCA (Pre-Amp) to B&O BeoLab 3/9/4000(Mk2)/6002/8002 Cables (Stereo Pair)' products allows you to connect a piece of auxiliary equipment, whether it be a pre-amplifier, AV receiver, PC or any other source with volume-controlled RCA Phono type outputs directly to your BeoLab loudspeakers (models listed below). These cables allow you to connect your BeoLab speakers even if you do not have a Bang & Olufsen music and/or TV system. Please note that the audio outputs on your equipment must be of the 'volume-controlled' type. If you are not sure, please just ask by sending us a message.
These cables are of the absolutely highest possible quality and use some of the very best components found in the audio industry. To include pure oxygen free copper conductor cable, multi-stranded quad conductor wiring for superior performance, audio signal transfer and interference free, PowerLink data grounding, background noise cancellation, impedance matched, audio and voltage referencing conductors, connections screening and 24 carat gold plated pins in both the 7-Pin PowerLink connectors and RCA Phono plugs.
Simply connect your auxiliary equipment using the two RED and BLACK phono cinch connector plugs at one end and your BeoLab 3, 9, 4000(Mk2), 6002 or 8002 at the other. In order to establish a connection to your equipment, the little switch on each BeoLab loudspeaker should be set to the 'LINE' position (Not L or R).
Some of the various sources that this cable can be used with include: Audio Pre-Amplifiers & AV Receivers. They can not be used with equipment with fixed level outputs such as 'LINE OUT' and 'TAPE OUT' connections as these are not volume controlled. Most TV's, satellite receivers etc only have fixed level RCA audio outputs.
We recommend that you turn the volume level down on your audio equipment on initial setup.
These cables use high quality components and studio grade, fully-shielded oxygen free copper (OFC) conductors - NOT to be confused with cheaper products that you might see advertised. Designed and manufactured to extract the very best performance and sound quality from your Bang & Olufsen audio and video system.
BeoLab Speaker Compatibility List
BeoLab 3
BeoLab 9
BeoLab 4000 (Mk2)
BeoLab 6002
BeoLab 8002
Should you require 'LINE' cables for use with any other model in the BeoLab range (i.e. model NOT shown in the list above), please ask as we will have these available as different products.
We also have other versions of these B&O speaker cables available in our eBay store, together with other variants of PowerLink cables.
Should you wish to check the compatibility with your system, please contact us by clicking HERE
Custom Length Service
We have these available in standard lengths in the colour black. Please see our other eBay listings for different lengths as 'Buy it Now'. Should you require a specific, bespoke length, please contact us for a price.
Bang & Olufsen Installers
Are you a B&O installer and wish to order multiple quantities? If so, please send us a message for a discounted price.
Length Options
We have these cables available in various lengths as 'Buy It Now'.
Technical Specifications
B&O Specified CableVery high quality oxygen free copper conductorsVery low-loss of signal quality over short and long cable lengthsFully screened cable and connectorsAudio signal transfer/grounding, data signal ground, speaker on/standby signalBlack outer sheath cable with a small diameter of just 4.5 mm for greater flexibility of placement and installation
Oxygen free pure copper conductors
Impedance matched
Quad wired for superior sound quality and performance
Individual screening all ALL internal cores
Metal bodied 7-Pin DIN PowerLink Plugs with 24 carat gold plated pins (central 8th pin not required)
Metal bodied RCA Plugs with 24 carat gold plated contacts
Fully earthed and screened from mains and other external interference
Data/Audio grounding
Black outer sheath cable with a small diameter of just 4.5 mm for greater flexibility of placement and installation
Oxygen free pure copper conductors
Impedance matched
Quad wired for superior sound quality and performance
Individual screening all ALL internal cores
Metal bodied 7-Pin DIN PowerLink Plugs with 24 carat gold plated pins (central 8th pin not required)
Metal bodied RCA Plugs with 24 carat gold plated contacts
Fully earthed and screened from mains and other external interference
Data/Audio grounding