The excellent FPGBC FPGA powered handheld by Funnplaying brings a new dimension to Gameboy Color and Original Gameboy gaming on a budget for gamers.
This is the full kit and will require assembly.
Compatible with all GBC and GB DMG games and with some modern upgrades.
The sound is the best you will hear from the Gameboy Color and the display is a major improvement over the stock display.
This kit is easy to install and can be assembled in less than 10 minutes.
https://youtu.be/Xx4hmsFzlKY?si=AOfEsPV-IqPfRS-6
FEATURES
- Simulating real hardware using FPGA
- Supports hardware cartridge
- Features USB-C compatibility for easy firmware updates (only supported through Windows system）
- Amazing high quality 2w speakers producing excellent sound with no hiss.
- Compatible with some flash cards and compatible with other flash carts are updated with firmware revisions
INCLUDED
- 1 x FPGBC PCB HW ver 1.1
- 1 x Display panel with adapter ribbon
- 1 x 2w speaker
- 1 x 1600mAH battery
- Clear dark blue Funnyplaying shell with USB C cut out
- Black buttons and matching black silicon buttons
NOTES
- Only supports lithium battery and charges through the usb c port,
- Fast forward clock 1.25 speed
- Firmware update are very straightforward -https://github.com/makhowastaken/GWGBC_FW
Please note: -
Please test before installing.
Don't touch the back of the panel against the pin of the card slot when testing.
This will cause damage to the panel and motherboard. Insulate this with either kapton or electrical tape
Place the motherboard onto the back half of the shell. Place a piece of paper between the back of the screen and the motherboard so to insulate them both.
Attach both the screen ribbon to the motherboard and attach the rechargeable battery. Slide the power switch