I. Technical Parameters
Controller Touch Remote Control

Supply Voltage: DC 12V to 24V Supply Voltage: 3 x 1.5V
Max. Output Current: <10A Power Supply: AAA x 3
Max. Output Power: 12V: <120W; 24V: <240W Standby Power Consumption: 0.015mw
Static Power Consumption: <1W Standby Current: 3µA
Output: 1 Channel Working Current: 200µA
Connection Mode: Common Anode Emission Current: 10mA
Net Weight: 75gr Transmission Frequency: 2.4GHz
Gross Weight: 197gr Remote Control Weight: 85gr
External Dimension: L84 x W146 x H36mm Standby Time: 6 month
Packing Size: L200 x W146 x H36mm Remote Distance: ~30m
II. Control Descriptions
Button Indicator Descriptions

1. Power: Power indicator, it lights up when connected to external power supply
2. Signal: RF signal indicator, it flashes when receiving correct control signal
3. Match Code and Clear Code Key. Clear code: Hold the key when power on. After code cleared all remote controllers can be used. Match Code: Press key while power is on. After matching code, only the remote control with the same address can be used for controlling.
4. Function: On/Off and Mode key. Long press on button for On/Off function.
Short press to switch mode.

1. Direction for use of remote control

(1) On/Off key. Turn controller on/off
(2) Brightness hotkey: Brightness 25%
(3) Brightness 75%
(4) Brightness 100%
(5) Brightness 50%
(6) Touch ring, sliding finger along the
A to B direction, brightness will increase
gradually and sliding finger opposite way
will decrease brightness.

Power Supply Management:
If not using the remote control for 15-20 seconds, it will enter the standby state, to extend the battery life.
Colour ring cannot be used at this time.
Slightly shake remote once, then remote will come back to the normal working state.