2013-2015 Fit for XV Crosstrek 2.0L H4 Gas DOHC; Sport Utility
2014-2015 Fit for Sbaru XV Crosstrek 2.0L H4 FULL HYBRID EV-Gas FHEV DOHC; Sport Utility
2012-2014 Fit for Impreza 2.5L H4 Gas DOHC Turbo; Sedan/ Hatchback
2012-2016 Fit for Impreza 2.0L H4 Gas DOHC; Sedan/ Hatchback
2014-2018 Fit for Forester 2.0L H4 Gas DOHC Turbo; Sport Utility
2014-2018 Fit for Forester 2.5L H4 Gas DOHC; Sport Utility
2016 Fit for Crosstrek 2.0L H4 FULL HYBRID EV-Gas FHEV DOHC; Sport Utility
WIND POWER STRONG | LOW NOISE | Connector Pins: 2-Pin |
1) Locate the blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. And disconnect the blower motor electrical connector
(Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall).
2) Remove the retaining screws to the blower motor assembly.
3) Remove the blower motor retaining screws. Remove the motor from the box.
4) Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly.
5) Connect the blower motor electrical connector.
6) Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.